Cinematography — Printed 8 mm, Type S, image area on 16 mm motion-picture film perforated 8 mm, Type...
This International Standard specifies the position and dimensions of the 8 mm, Type S printed picture areas for negative/positive and reversal printing on 16 mm motionpicture film perforated 8 mm, Type S, in positions 1 and 4.
Cinematography — Tape splices for 8 mm Type S motion-picture film for projector use — Dimensions
This International Standard specifies the dimensions of mated tut splices on 8 mm motion-picture film petforated 8 mm Type S made with a transparent adhesive tape. The specifications herein apply to magnetic and photographic Sound films as well as to silent films intended only for projection.
Radiographic image quality indicators for non-destructive testing — Principles and identification
The detection of an imperfection in a product subjected to X or gamma radiography depends on the quality of the resultant radiograph. This quality should be checked with an image quality indicator. This International Standard is intended for general application on all metals. However, for particular materials (for example, aluminium and its alloys) complementary International Standards may be…
Lays down the specification for products with metric dimensions and nominal shoulder diameters form 6,5 mm up to and including 25 mm; gives geometrical tolerances; includes specifications with reference to International Standards; gives an example for the designation.
Cinematography — Motion-picture camera cartridge, 8 mm type S, model 1 — Camera run length, perforat...
This International Standard gives specifications for the Camera run length, Perforation Cut-out notch, and end-of-run notch in film supplied in
- 8 mm type S model I motion-picture film Camera cartridges of 15 m (50 ft) and 60 m (200 ft) nominal capacity;
- and 8 mm type S model I Sound motion-picture film Camera cartridges of 15 m (50 ft) and 60 m (200 ft) nominal capacity.
lt also gives…
Cross recessed countersunk (flat) head tapping screws (common head style)
Specifies the characteristics of products with thread sizes form ST 2,2 up to and including ST 9,5; includes specifications with reference to International Standards; gives an exaple for the designation.
Cross recessed raised countersunk (oval) head tapping screws
Specifies the characteristics of products with thread sizes form ST 2,2 up to and including ST 9,5; includes specifications with reference to International Standards; gives an example for the designation
Slotted countersunk (flat) head tapping screws (common head style)
Specifies the characteristics of screws with thread sizes from ST 2,2 up to and including ST 9,5; includes specifications with reference to international Standards; gives an example for the designation.
Slotted raised countersunk (oval) head tapping screws (common head style)
Specifies the characteristics of screws with thread sizes from ST 2,2 up to and including ST 9,5; includes specifications with reference to International Standards; gives an example for the designation.
Agricultural tractors and machinery — Track widths
This International Standard cancels and replaces ISO Technical Report ISO/TR 4004-1975. Applies to the principal driven axle(s) of tractors and to macinery, including self-propelled machinery, uesd in fields for row-crops. It does not apply to tractors of special types, to walking tractors, to single-axle motor-driven machines, to two-wheeled propulsion units, or to agricultural machinery of…
