Steel products for pressure purposes — Derivation and verification of elevated temperature propertie...
Defines a method for deriving minimum elevated temperature proof stress values for inclusion in International Standards for austenitic steel products. Defines further a verification procedure which may be used by a manufacturer as an alternative to hot-testing for satisfying the purchaser that his product meets the specified minimum elevated temperature proof stress values.
Single-Phase Submersible Distribution Transformers, Type ONAN
1. Scope
1.1 This Standard covers the features of single-phase submersible transformers. For other details, reference shall be made to CSA Standard C2, Single-Phase and Three-Phase Distribution Transformers Types ONAN and LNAN, hereinafter referred to as CSA Standard C2. Note: See Appendix A, Recommendations for Corrosion Control of Submersible Transformer Installations, which covers…
Cinematography — Motion-picture camera cartridge, 8 mm Type S Model II — Slots, projections and cart...
This International Standard specifies the dimensions and location sf cartridge Slots, projections and a hole for the Model II 8 mm Type S film Camera cartridge which, when included by the manufacturer, automatically preset some cameras in accordance with the effective film Speed, and insert or withdraw a colour-balancing f ilter. The combinations which are possible, together with the area…
Cinematography — Image area produced by camera aperture and maximum projectable image area on 8 mm T...
This International Standard specifies the location and dimensions of the image area produced by the camera aperture on 8 mm Type R motion-picture film, and the dimensions of the maximum film image area intended for projection.
Cinematography — Motion-picture camera cartridge, 8 mm Type S Model II — Cartridge fit and take-up c...
This International Standard specifies the external dimensions of the 8 mm Type S film Camera cartridge, Model I 1, cartridge-Camera fit specifications, and core dimensions.
Gaseous halogenated hydrocarbons (liquefied gases) — Taking of a sample
Applicable for sampling from containers (cylinders, drums, tanks, etc.). Sampling of the product in a steel cylinder, previously cleaned, dried and evacuated. The stainless steel cylinder shall be capable of withstanding an internal pressure of at least 3 MPa (30 bar). The cylinder is filled to the filling ratio allowed by the safety considerations. Details are given in the relevant international…
Joints in building — General check-list of joint functions
Forms one of a series concerning joints in building. The series includes the following International Standards: ISO 2444 - Joints in building - Vocabulary; ISO 2445 - Joints in building - Fundamental principles for design. Gives a general check-list of functions of joints in building for use in their design.
