Search

This International Standard specifies the physical and magnetic characteristics of an 8 mm wide magnetic tape cartridge to enable interchangeability of such cartridges. It also specifies the quality of the recorded signals, the format and the recording method, thus allowing, together with ISO 1001 for Magnetic Tape Labelling, full data interchange by means of such magnetic tape cartridges. It is…

This International Standard specifies the physical and magnetic characteristics of a 3,81 mm wide magnetic tape cartridge to enable interchangeability of such cartridges. It also specifies the quality of the recorded signals, the recorded format and the recording method, thereby allowing data interchange between drives by means of such magnetic tape cartridges. The format used is known as DATA/…

This International Standard specifies the physical and magnetic characteristics of a 12,7 mm wide, 48-track magnetic tape cartridge, to enable interchangeability of such cartridges. It also specifies the quality of the recorded signals, a format — called Digital Linear Tape 1 (DLT 1) — and a recording method. Together with a labelling standard, e.g. ISO 1001, it allows full data interchange by…

Specifies the requirements for the dimensional characteristics, chemical and mechanical properties and gauging practice. Requirements are specified in the twenty-forth edition of API Specification 11B (Spec 11B), October 1990, which is adopted as ISO 10428. For the purposes of international standardization, modifications have been made that are outlined.

Lays down the specification covering the design and rating. Specifies the requirements for the dimensional characteristics, chemical and mechanical properties and gauging practice. Requirements are specified in the sixteenth edition of API Specification 11E (Spec 11E), October 1989, which is adopted as ISO 10431. For the purposes of international standardization, modifications have been made that…

Specifies the characteristics (dimensions, specifications, designation) for screws having threads from M1,6 up to and including M24 and of product grade A. If, in special cases, specifications other than those listed are required, they should be selected from existing international standards, e.g., ISO 261, ISO 888, ISO 898-5 and ISO 965-2. Annex A describes gauging of hexagon socket.

Specifies the characteristics (dimensions, specifications, designation) for screws having threads from M1,6 up to and including M24 and of product grade A. If, in special cases, specifications other than those listed are required, they should be selected from existing international standards, e.g., ISO 261, ISO 888, ISO 898-5 and ISO 965-2. Annex A describes gauging of hexagon socket.

Specifies the characteristics (dimensions, specifications, designation) for screws having threads from M1,6 up to and including M24 and of product grade A. If, in special cases, specifications other than those listed are required, they should be selected from existing international standards, e.g., ISO 261, ISO 888, ISO 898-5 and ISO 965-2. Annex A describes gauging of hexagon socket.

Specifies the characteristics (dimensions, specifications, designation) for screws having threads from M1,6 up to and including M24 and of product grade A. If, in special cases, specifications other than those listed are required, they should be selected from existing international standards, e.g., ISO 261, ISO 888, ISO 898-5 and ISO 965-2. Annex A describes gauging of hexagon socket.

The procedure includes weighing out a test portion of approximately 300 g of the sample, placing the test portion in the top sieve of a set of test sieves (including all the sieves listed against the grade under test in the appropriate part of ISO 11126) with the largest-aperture sieve on the top and progress to the smallest aperture at the bottom with a pan, to catch any abrasive that falls…