Search

This National Standard of Canada is equivalent to International standard ISo 8378/2:1986. This standard specifies the quality of recorded signals, the track layout, and a track format to be used on 130 mm (5.25 in) flexible disk cartridges intended for data interchange between data processing systems. Note - Numeric values in the SI and/or Imperial measurement system in this standard…

This National Standard of Canada is based on International Standard IEC 1010-2-010:1992. 1. Scope and Object This clause of Part 1 is applicable except as follows: 1.1 Scope: This part 2 applies only to electrical powered laboratory equipment for the heating of materials, where the heating of materials is the only function or is one of several functions of the equipment. 1.1.2…

This National Standard of Canada is based on International Standard IEC 1010-2-020:1992. 1. Scope and Object This clause of Part 1 is applicable except as follows: 1.1 Scope This Particular Standard specifies requirements for the safety of electrically powered laboratory centrifuges designed to be installed and used in accordance with the Rules of the Canadian Electr ical Code,…

This National Standard of Canada is based on International Standard IEC 1010-2-031:1993. 1. Scope and Object This clause of part 1 is applicable except as follows: 1.1 Scope Replacement: This Particular Standard specifies requirements for the safety of hand-held and hand-manipulated probe assemblies designed to be used with equipment installed and used in accordance with the Rules…

Provides guidelines for the design, analysis, testing, storage, handling and installation of flexible pipe systems used in a variety of offshore oil production applications. Requirements are specified in API Recommended Practice 17B (API RP 17B), first edition, June 1 1988, which is adopted as ISO 10420. For the purposes of international standardization, however, modifications shall apply to…

Specifies the characteristics of countersunk raised head screws of product grade A, with threads from M1,6 to M10 inclusive and with type H or type Z cross recess. If, in special cases, specifications other than those listed here are required, they should be selected from existing International Standards, e.g. ISO 261, ISO 888, ISO 898-1, ISO 965-2 and ISO 3506.

Specifies the characteristics of slotted countersunk flat head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications other than those listed here are required, they should be selected from existing International Standards, e.g. ISO 261, ISO 888, ISO 898-1, ISO 965-2 and ISO 3506.

Specifies the characteristics of countersunk slotted raised head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications other than those listed here are required, they should be selected from existing International Standards, e.g. ISO 261, ISO 888, ISO 898-1, ISO 965-2 and ISO 3506.

Specifies the characteristics of slotted pan head screws of product grade A and with threads from M1,6 to M10 inclusive. If, in special cases, specifications other than those listed here are required, they should be selected from existing International Standards, e.g. ISO 261, ISO 888, ISO 898-1, ISO 965-2 and ISO 3506.

Specifies the characteristics of pan head screws of product grade A, with threads from M1,6 to M10 inclusive and with type H or type Z cross recess. If, in special cases, specifications other than those listed here are required, they should be selected from existing International Standards, e.g. ISO 261, ISO 888, ISO 898-1, ISO 965-2 and ISO 3506.