Quality management and quality assurance standards - Part 2: Generic guidelines for the application ...
This National Standard of Canada is equivalent to International Standard ISO 9000-2:1997.
1 Scope
This part of ISO 9000 gives guidance on the application of the 1994 versions of
ISO 9001, ISO 9002 and ISO 9003.
It does not add to, or otherwise change, the requirements of ISO 9001, ISO 9002
or ISO 9003. In the case of conflicting interpretations of ISO 9001, ISO 9002
or ISO 9003 on…
1.1 SCOPE
1.1.1 This standard applies to newly produced gas appliance connectors constructed entirely of new, unused parts and materials that:
a. Are intended for use with gas-fired commercial cooking equipment that may be mounted on casters or otherwise be subject to movement for cleaning, and with other large and heavy gas-fired equipment that may be moved;
b…
CAN/CSA-A5-98 Portland Cement
1. Scope
1.1 Scope
This Standard addresses the definition of Portland cement; the chemical, physical, and uniformity requirements; the tests required; the procedures for inspection and sampling; the units of measurement, packaging, marking, and storage.
1.2 Types
The five types of Portland cement covered in this Standard are identified as follows:
Type…
Guidelines for the development and use of medical electrical equipment
educational materials
This National Standard of Canada is equivalent to International Technical Report CEI/IEC 1258:1994.
1 Scope
This document outlines a generic process for developing materials for
education and training of operators of medical electrical equipment. It may be
used by standards organizations, manufacturers, regulatory agencies, hospital
managers, clinical engineers, physician and nurse…
Shunt capacitors for a.c. power systems having a rated voltage above 660 V -
Part 2: Endurance test...
This National Standard of Canada is equivalent to International Standard IEc
871-2:1987.
1. Scope
This report applies to capacitors according to IEC Publication 871-1 and
gives the requirements for endurance testing of these capacitors.
Medical electrical equipment - Part 2: Particular requirements for the safety of electroencephalogra...
This National Standard of Canada is equivalent to International Standard IEC 601-2-26:1994.
1.1 Scope
This Standard specifies the particular safety requirements for ELECTROENCEPHALOGRAPHS (EEG) as defined in 2.102 hereinafter and also referred to as EQUIPMENT.
The special requirements for other equipment also used in electroencephalography are not covered by this Standard, for…
Medical devices - Validation and routine control of ethylene oxide sterilization
This National Standard of Canada is equivalent to International Standard ISO 11135:1994.
1 Scope
1.1 This International Standard establishes requirements and guidance for
validation and routine control of ethylene oxide sterilization processes for
medical devices.
Particular attention is drawn to the need for specific testing for safety,
quality and efficacy, possibly exceeding the…
Sterilization of health care products - Requirements for validation and routine control - Radiation ...
This National Standard of Canada is equivalent to International Standard ISO 11137:1995.
1 Scope
This International Standard specifies requirements for validation, process
control and routine monitoring in the radiation sterilization of health care
products. It applies to continuous and batch type gamma irradiators using the
radionuclides 60 Co and 137 Cs, and to irradiators using a…
1. Scope
1.1 Applicability
This Standard defines the alphanumeric lexical sequence for the English and
French languages, corresponding to Canadian cultural expectations. It is
intended for general-purpose sorting of alphanumeric strings using the
character repertoire of CSA Standards CAN/CSA-Z243.4 and T500, wherever human
intervention is involved or sorted results are presented to users.
1.2…
1. SCOPe
1.1 This standard applies to diemakers', machinists' and cylinder squares used
in determining angles when manufacturing parts. Carpenters' squares are not
included in this standard.
1.2 The squares shall be graduated in the International System of Units (SI)
and/or the Yard/Pound System. If a value for a measurement given in this
standard is followed by an equivalent…