Search

Gives the requirements for one type of heat-shrinkable polyolefin sleeving with a temperature index of 135 and a nominal shrink ratio of 3:1. This sleeving is not flame retarded. It is normally supplied with internal diameter up to 39 mm and the standard colour is transparent.

Gives the requirements for one type of heat-shrinkable, flame retarded, fluid resistant, elastomer sleeving with temperature index of 120 and a nominal shrink ratio of 2:1. This sleeving is normally supplied with internal diameter up to 102 mm and the standard colour is black.

This is a searchable PDF. 1.1 Scope and References 1.1.1 This standard applies to packaged, self-contained or factory matched packages of integrated systems (see 1.2.1) fuel cell power plants, hereinafter referred to as power plant(s), which, through electrochemical reactions and other processes, generate alternating-current electricity. 1.1.2 This standard applies to power…

This National Standard of Canada is based on International Standard CEI/IEC 598-2-3: 1993 (second edition, 1993-04), including Amendment 1:1997, and 2:2000. Note - Amendment No. 2 reaffirmed 2007-03-28. Scope This Standard specifies requirements for luminaires for road and street lighting for use with tungsten filament, tubular fluorescent, and other discharge lamps designed to be…

This National Standard of Canada is based on International Standard IEC 60598-2-4:1997 Scope This section of Part 2 of IEC Publication 60598 specifies requirements for portable general purpose luminaires, other than handlamps, for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltages not exceeding 120 V. It is to be read in conjunction with those sections…

This National Standard of Canada is based on International Standard IEC 432-2:1994. 1.1 Scope This part of IEC 432 specifies the safety and the related interchangeability requirements of tungsten halogen lamps for general lighting service. It covers those tungsten halogen lamps that are used as direct replacements for conventional tungsten filament lamps as well as new tungsten halogen…

This National Standard of Canada is based on International Standard CEI/IEC 920:1990 1. Scope This standard covers ballasts, excluding resistance types, for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz, associated with tubular fluorescent lamps with or without pre-heated cathodes operated with or without a starter or starting device and having rated wattages, dimensions and…

Gives the requirements for one type of heat-shrinkable, flame retarded, fluid resistant, polvinylidene fluoride sleeving with a temperature index of 175 and a nominal shrink ratio of 2:1. This sleeving is normally supplied with internal diameter up to 25,4 mm and the standard colour is transparent.

Gives the requirements for one type of heat-shrinkable, flame retarded polyolefin sleeving with a temperature index of 135 and a nominal shrink ratio of 3:1. It is normally supplied with internal diameter up to 39 mm and in the following standard colours: black, brown, red, yellow, green, blue, orange, violet, grey and white.