Cinematography — 16 mm motion-picture and magnetic film — Cutting and perforating dimensions
This International Standard specifies the cutting and perforating dimensions for 16 mm motion-picture and magnetic films with one or two rows of perforations for the following two categories:
a) 16 mm motion-picture and magnetic films;
b) manufacturer-designated 16 mm professional motion-picture camera films with tighter tolerances.
This International Standard applies to safety raw stock film…
Oil of turpentine, Iberian type (Pinus pinaster Sol.)
This International Standard specifies certain characteristics of oil of turpentine, Iberian type (Pinus pinaster Sol.), in order to facilitate assessment of its quality.
Adhesives — Determination of strength of bonded joints using a bending-shear method
This International Standard describes a procedure for the determination of the strength of adhesive joints, using a bending-shear method. The method can only be used for comparing adhesives, and the results cannot be used for design purposes.
Adhesives — Determination of the time to rupture of bonded joints under static load
This International Standard describes a procedure for the determination of the time to failure of a bonded joint, using a specimen which is statically loaded under specified conditions. This method can only be used for comparing adhesives, and the results cannot be used for design purposes
Flexible insulating sleeving - Part 3: Specifications for indiviual types of sleeving - Sheet 272: H...
Gives the requirements for one type of heat-shrinkable, flame retarded, fluid resistant, elastomer sleeving with temperature index of 120 and a nominal shrink ratio of 2:1. This sleeving is normally supplied with internal diameter up to 51 mm and the standard colour is black.
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 233: ...
Gives the requirements for one type of heat-shrinkable, flame retarded, fluid resistant, fluoroelastomer sleeving with temperature index of 200 and a nominal shrink ratio of 2:1. This sleeving is normally supplied with internal diameter up to 51 mm and the standard colour is black.