Earth-Moving Machinery - Symbols for Operator Controls and Other Displays - Part 2: Specific Symbols...
This National Standard of Canada is based on International Standard ISO 6405-2:1993 (first edition, 1993-12-15).
1. Scope
This part of ISO 6405 establishes symbols uniquely for use on operator controls and other displays on earth-moving machinery as defined in ISO 6165.
Symbols given in this part of ISO 6405 apply to controls and displays specific to backhoe loaders, dozers, loaders,…
Machinery for Forestry - Winches - Performance Requirements
This National Standard of Canada is equivalent to International Standard ISO 6687:1994.
1 Scope
This International Standard specifies a uniform method of defining specification measurements, drum storage capacity, line pull and line speed for winches used in tree harvesting machines.
Earth-Moving Machinery - Laboratory Evaluation of Operator Seat Vibration
This National Standard of Canada is based on International Standard ISO 7096:1994 (second edition, 1994-10-01).
1. Scope
This International Standard specifies a laboratory method for vibration testing of operator seats for earth-moving machinery at frequencies between 1 Hz and 20 Hz.
It is based on ISO 10326-1 which is a general method applicable to seats for different types of vehicles…
This National Standard of Canada is based on International Standard ISO 2860:1992 (fourth edition, 1992-02-15).
1. Scope
This International Standard specifies the minimum access openings on earth-moving machinery as defined in ISO 6165 for
(a) hand access,
(b) head access,
(c) body access,
(d) arm access,
(e) two-handed access.
It provides engineers and designers with information…
Carbonaceous materials used in the production of aluminium — Green coke and calcined coke for electr...
This International Standard specifies an X-ray fluorescence method for the determination of elemental impurities in
green and calcined petroleum cokes used for the manufacture of anodes. These anodes are used in the production
of aluminium.
Water quality — Determination of the genotoxicity of water and waste water using the umu-test
This International Standard specifies a procedure which can be used to determine the genotoxicity1) of water and
waste water using the umu-test.
This assay is based on the detection of genotoxicity of a test sample which increases the expression of the SOSrepair
system2) associated with the umuC-gene3).
Water quality — Determination of long term toxicity of substances to Daphnia magna Straus (Cladocera...
This International Standard describes a method for the determination of the long term sublethal toxicity to Daphnia
magna Straus (Cladocera, Crustacea) of:
a) chemical substances, which are soluble under the conditions of the test, or can be maintained as stable
suspensions or dispersions under the conditions of the test,
b) industrial or sewage effluents, treated or untreated, after decanting,…
Information technology — Methods for data flow control at synchronous and asynchronous DTE-DCE inter...
This Technical Report provides guidance for the choice of an appropriate method for, and the implementation of,
data flow control capabilities in DTEs and DCEs. It also coordinates information from other Recommendations and
International Standards and provides tutorial material on these flow control techniques.
Information technology - Methods for data flow control at synchronous and asynchronous DTE-DCE inter...
This Technical Report provides guidance for the choice of an appropriate method for, and the implementation of,
data flow control capabilities in DTEs and DCEs. It also coordinates information from other Recommendations and
International Standards and provides tutorial material on these flow control techniques.
Composition cork — Specifications, sampling, packaging and marking
This International Standard establishes the minimum requirements for agglomerated composition cork in the sheet
form and specifies the requirements for sampling, packaging and marking.