Search

This International Standard specifies the framework, concepts and methodology for testing and criteria to be achieved to claim conformance to the family of ISO geographic information standards. It provides a framework for specifying abstract test suites (ATS) and for defining the procedures to be followed during conformance testing. Conformance may be claimed for data or software products or…

This International Standard specifies the 34- pole connector and the assignment of contact numbers at the interface between data terminal equipment (DTE) and data circuit-terminating equipment (DCE) where ITU-T Recommendation V.36 or Recommendation X.21bis together with Recommendation V.10 and V.11 are applicable. NOTE 1 An interoperation between interfaces designed according to electrical…

This International Standard specifies the physical and magnetic characteristics of an 8 mm wide magnetic tape cartridge containing a memory chip to enable physical interchange of such cartridges between drives. It also specifies the quality of the recorded signals, the recording method and the recorded format - called Advanced Intelligent Tape No. 1 with Memory In Cartridge (AIT-1 with MIC) -…

This International Standard establishes ergonomic recommendations for different work tasks. This standard provides information to those involved in design, or redesign, of work, jobs and products who are familiar with the basic concepts of ergonomics in general, and working postures in particular. It specifies recommended limits for static working postures without any or only with minimal…

This International Standard specifies methods for sampling adhesives and related products, in order to obtain uniform samples of convenient size which are adequately representative of the product being sampled. The sample or samples so obtained are suitable for examination and preparation prior to testing. The methods are applicable to products which require the addition and mixing in of…

1.1 This International Standard specifies the procedure for determining the relative resistance of stainless steels and nickel-base alloys to stress corrosion cracking in a sodium chloride drop evaporation system. 1.2 The method results in a threshold stress to fracture, the magnitude of which can be used to rank the relative performance of different alloys for this environment.

This International Standard specifies the information to be supplied by the purchaser to the finisher, requirements and test methods for electropolishing as a means of smoothing and passivating stainless steel alloys in the S2XXXX, S3XXXX and S4XXXX series, and the precipitation hardened alloys (see ISO/TR 15510 for information on composition).

This International Standard specifies an infrared absorption method, after combustion in an induction furnace, for the determination of the total carbon and sulfur content in steel and iron. The method is applicable to carbon contents of mass fraction between 0,005 % and 4,3 % and to sulfur contents of mass fraction between 0,000 5 % and 0,33 %. This method is intended to be used in normal…

1.1 This International Standard describes methods for evaluating the effectiveness of chemical conversion treatments intended to increase the resistance of wet-processed silver images to oxidation. The treatment may be applied as part of the original processing, or it may be a post-processing treatment. This International Standard does not recommend general or specific treatments for silver…

ISO 9001:2000 specifies requirements for a quality management system where an organization needs to demonstrate its ability to consistently provide product that meets customer and applicable regulatory requirements, and aims to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the system and the assurance of conformity…