Implants for Surgery - Cardiac Pacemakers - Part 3: Low-Profile Connectors
[IS-1] for Implantable P...
This National Standard of Canada is equivalent to International Standard ISO 5841-3:2000.
1 Scope
This part of ISO 5841 specifies a connector assembly to be used to connect
implantable pacemaker leads to implantable pacemaker pulse generators.
Essential dimensions and performance requirements related to connector fit are
specified, together with appropriate test methods.
Other…
Plastics — Unsaturated-polyester resins — Measurement of gel time at ambient temperature
This International Standard specifies methods of measuring, under defined conditions, the gel time at ambient
temperature (i.e. within the range 18 °C to 30 °C) of unsaturated-polyester resins.
The referee temperature, if needed, is 25 °C.
Pneumatic fluid power — Directional control valves — Measurement of shifting time
This International Standard
— specifies test procedures for measuring the shifting times of electrically- or pneumatically-operated directional
control valves and moving-part logic elements,
— establishes a definition for shifting time, and
— is intended to improve the application of pneumatic fluid power by providing users and manufacturers of
pneumatic valves with a standardized test procedure…
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 121 ...
Gives the requirements for four types of non-heatshrinkable sleeving, extruded from silicone elastomer. These sleevings are normally available with internal diameter up to 25 mm and in a range of wall thicknesses between 0,1 mm and 2,0 mm. National standards may select a restricted list of preferred combinations of internal diameter and wall thickness.
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheets 121 ...
Gives the requirements for four types of non-heatshrinkable sleeving, extruded from silicone elastomer. These sleevings are normally available with internal diameter up to 25 mm and in a range of wall thicknesses between 0,1 mm and 2,0 mm. National standards may select a restricted list of preferred combinations of internal diameter and wall thickness.
Rigid cellular plastics — Determination of water absorption
This International Standard specifies a method for the determination of the water absorption of rigid cellular plastics
by measuring the buoyant force on a test specimen after immersion under a 50 mm head of water for 4 days.
Corrections are specified to take account of any change in volume of the specimen and also to correct for the
volume of water in the cut surface cells of the specimen. The…
This International Standard specifies the dimensions and mechanical properties of cycle chains, as well as test
methods for determining these mechanical properties (i.e. twist, lateral deviation, stiff link and side bow).
NOTE The dimensions of sprockets for cycle chains are specified in ISO 606.