Water quality — Determination of soluble silicates by flow analysis (FIA and CFA) and photometric de...
This International Standard specifies two methods, i.e. flow injection analysis (FIA) and continuous flow analysis (CFA), for the determination of soluble silicate ions in various types of water (such as ground, drinking, surface, leachate and waste water). Both methods are applicable to the determination of a mass concentration of silicate (SiO 2) ranging from 0,2 mg/l to 20 mg/l (with working…
Identification cards - Thin flexible cards - Part 3: Test methods
Thin flexible cards, the subject of this International Standard, are used to automate the controls for access to goods or services such as mass transit, highway toll systems, car parks, vouchers, stored value, etc.
For these applications, data can be written and/or read by machines using various recording techniques such as magnetic stripe, optical character recognition (OCR), bar code, etc.
This…
Information technology - Enhanced communications transport protocol: Specification of simplex multic...
This Recommendation | International Standard specifies the Enhanced Communications Transport Protocol (ECTP),
which is a transport protocol designed to support Internet multicast applications over multicast-capable IP networks.
This Recommendation | International Standard specifies the ECTP for the simplex multicast transport connection that
consists of one sender and many receivers. This…
This International Standard specifies the physical, mechanical, packaging and labelling requirements for curing polymerizing radio-opaque and non-radio-opaque resin cements based on poly(methacrylic acid esters). It applies to two types of cement, intended respectively for use with a syringe or in the dough state, for the fixation of internal orthopaedic prostheses and supplied as units…
Medical Electrical Equipment - Part 2-23: Particular Requirements for the Safety, Including Essentia...
This National Standard of Canada is equivalent to International Standard IEC 60601-2-23:1999, (second edition, 1999-12).
1 Scope and object
This clause of the General Standard applies except as follows:
*1.1 Scope
Addition:
This Particular Standard specifies requirements for the safety, including essential performance, of TRANSCUTANEOUS PARTIAL PRESSURE MONITORING EQUIPMENT, as defined in 2.…
Medical Electrical Equipment - Part 2-30: Particular Requirements for the Safety, Including Essentia...
This National Standard of Canada is equivalent to International Standard IEC 60601-2-30:1999, (second edition, 1999-12).
Scope and object
This clause of the General Standard applies except as follows:
*1.1 Scope
Addition:
This Particular Standard specifies requirements for the safety, including essential performance, of AUTOMATIC CYCLING NON-INVASIVE BLOOD PRESSURE MONITORING EQUIPMENT as…
Audit Checklist for Environmental Management Systems
Introduction
1.1 The ISO 14000 Series The ISO 14000 series is made up of voluntary standards that provide organizations with guidance on how to manage the environmental aspects of their activities, products, and services more effectively. The series has been developed, and is continually reviewed, to support organizations in their efforts to control environmental impacts in a responsible…
Rubber condoms for clinical trials — Measurement of physical properties
This International Standard is intended as a guideline for clinical researchers working with condoms. It suggests a
series of laboratory tests to be conducted on the products to be used in any clinical investigation, so that it will be
easier to relate the clinical results to the design and quality of the condoms used.
This International Standard is not applicable to the design of clinical…
ISO 11323 gives the definitions for terms used in Technical Committee 102 standards (Iron ore and direct reduced iron) for sampling, sample preparation, moisture and particle size analysis and physical testing of iron ore and direct reduced iron. Also included are some specific analytical terms used in the relevant International Standards.
Animal feeding stuffs — Qualitative determination of zearalenone
This International Standard specifies a qualitative method for the determination of zearalenone in animal feeding
stuffs and, in particular, in maize. This method is for screening purposes only.
The limit of determination of zearalenone is approximately 50 μg/kg .
NOTE Although sorghum gives interfering fluorescent spots identical to those of zearalenone, the method is still applicable to this…