Freight containers — Straddle carriers for freight container handling — Calculation of stability
ISO 14829 specifies the calculations to be carried out to determine the stability of a straddle carrier.
The stability calculations specified in this International Standard are intended to ensure that users of straddle carriers have adequate information about the behaviour of these carriers under various operating conditions.
Stability warning and control devices are not covered by this…
Air quality — Evaluation of the suitability of a measurement procedure by comparison with a required...
This International Standard specifies, for the field of air quality measurement procedures, the:
estimation of measurement uncertainty from actual or claimed values of all important performance characteristics of a method under stationary conditions; assessment of whether or not specified values for these performance characteristics comply with the required quality of a measured value at a…
Information technology - Telecommunications and information exchange between systems - High-level da...
This International Standard specifies the frame structures, the elements of procedures, the classes of procedures, the content
and format of the general purpose Exchange Identification (XID) frame, and a means for resolution/negotiation of a data link
layer address in switched environments for data communication systems using bit-oriented high-level data link control
(HDLC) procedures.
NOTE The…
Tea and instant tea in solid form — Determination of caffeine content — Method using high-performanc...
This International Standard specifies a method for the determination by high-performance liquid chromatography (HPLC) of the caffeine content of teas and instant teas. It is applicable to green tea, black tea and decaffeinated tea products.
Cardiac defibrillators — Connector assembly DF-1 for implantable defibrillators — Dimensions and tes...
This International Standard specifies a unipolar connector assembly, DF-1, intended for use in connecting implantable defibrillator leads to implantable defibrillator generators that do not produce more than 1 kV/50 A peak output. Essential dimensions and performance requirements related to connector fit are specified, along with test methods.
This International Standard does not specify other…
This International Standard specifies certain characteristics of the oil of vetiver [Vetiveria zizanioides (L.) Nash], growing in Reunion Island, China, Haiti and Indonesia, in order to facilitate assessment of its quality.
Surge arresters - Part 6: Surge arresters containing both series and parallel gapped structures - Ra...
This standard basically applies to all metal-oxide surge arresters with gaps and housed in either porcelain or polymeric housings.
This standard also specifies requirements and tests for metal-oxide surge arresters with internal series gaps,with rated voltages of 52KV and below.
Cycles — Safety requirements for bicycles for young children
This International Standard specifies safety and performance requirements and test methods for the design, assembly and testing of bicycles for young children of from about four to eight years of age and these bicycles' sub-assemblies. It also provides guidelines for instructions on the use and care of the bicycles.
This International Standard is applicable to bicycles with a maximum saddle…
1. Scope
1.1
These provisions apply to the construction, materials, performance, and testing of NPS 1-1/4 in and smaller self-acting service-type regulators with internal relief valves or overpressure cut-off (OPCO)* devices, or both, utilized to control the pressure of gas delivered to a customer's piping at a delivery pressure of 5 to 9 in water column (1.24 to 2.24 kPa), for…
Electromagnetic Compatibility (EMC) - Part 4-17: Testing and Measurement Techniques - Ripple on d.c....
This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-4-17:1999 (first edition, 1999-06), including Amendment 1:2001.
1 Scope
This part of IEC 61000 defines test methods for immunity to ripple at the d.c. input power port of electrical or electronic equipment.
This standard is applicable to low-voltage d.c. power ports of equipment supplied by external…