Search

This National Standard of Canada is equivalent to International Standard ISO/TS 14048:2002 (first edition, 2002-04-01). 1 Scope This Technical Specification provides the requirements and a structure for a data documentation format, to be used for transparent and unambiguous documentation and exchange of Life Cycle Assessment (LCA) and Life Cycle Inventory (LCI) data, thus permitting consistent…

This National Standard of Canada is equivalent to International Standard CEI/IEC 1232:1993 (first edition, 1993-06). Scope This International Standard applies to bare, hard-drawn, round, aluminum-clad wires of different electrical and mechanical properties, in the diameter ranges shown in table 5, for electrical purposes, before stranding. It is intended to cover applications, for…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61558-2-1:1997 (first edition 1997-02). 1 Scope Replacement: This part 2 of IEC 61558 applies to stationary or portable, single-phase or polyphase, aircooled separating transformers, associated or not, having a rated supply voltage not exceeding 1000 V a.c., a rated frequency not exceeding 500 Hz, and a…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61558-2-2:1997 (first edition, 1997-10). 1 Scope Replacement: This part 2-2 of IEC 61558 applies to stationary or portable, single-phase or poly-phases, aircooled control transformers associated or otherwise having a rated supply voltage not exceeding 1 000 V a.c. or 1 415 V ripple free d.c. and rated…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61558-2-4:1997 (first edition, 1997-02). 1 Scope Replacement: This part 2 of IEC 61558 applies to stationary or portable, single-phase or polyphase, air-cooled isolating transformers, associated or otherwise, having a rated supply voltage not exceeding 1000 V a.c. and rated frequency not exceeding 500 Hz,…

This National Standard of Canada is equivalent to International Standard CEI/IEC/TS 60871-2:1999 (second edition, 1999-06). 1.1 Scope and object This technical specification applies to capacitors according to IEC 60871-1 and gives the requirements for overvoltage cycling and ageing tests of these capacitors.

ISO 6144:2003 specifies a method for the preparation of calibration gas mixtures by a static volumetric method and provides a procedure for calculating the volumetric composition of the mixture. It can be used either with binary gas mixtures (containing one calibration component in a complementary gas, which is usually nitrogen or air) or with mixtures containing more than one component in the…

ISO 8977:2002 lays down the basic dimensions and tolerances in millimetres for headless and headed matrixes, in the outside diameter range of 5 mm to 50 mm. It gives examples of material and hardness, and specifies a designation for matrixes that meet the requirements of this International Standard. Matrixes in accordance with ISO 8977:2002 are adapted in their dimensions and tolerances to meet…

ISO 2303 specifies, for general purpose non-oil-extended, solution-polymerized rubbers (IR): physical and chemical tests on raw rubbers;standard materials, standard test formulation, equipment and processing methods for evaluating the vulcanization characteristics. Two mill-mixing procedures are described in this Internatioanl Standard and an internal mixer-mill mixing procedure is described in…

This National Standard of Canada is equivalent to International Standard ISO 19011:2002 (first edition, 2002-10-01). 1 Scope This International Standard provides guidance on the principles of auditing, managing audit programmes, conducting quality management system audits and environmental management system audits, as well as guidance on the competence of quality and environmental management…