Search

This National Standard of Canada is based on International Standard ISO 5361:1999, first edition). 1 Scope This International Standard specifies requirements for the dimensions, basic properties and method of size designation of the most commonly used types of oro-tracheal and naso-tracheal tube made of plastics materials and/or rubber (plain and cuffed), and requirements for tracheal tube…

ISO 15011-2:2003 provides guidance on the determination of emission rates of gases generated by arc welding using a fume box technique. It describes the test principle, gives a possible fume box arrangement and considers methods for sampling and analysis. The following gases that can be produced during arc welding are covered: - carbon monoxide (CO); - carbon dioxide (CO2); - nitrogen oxide (NO…

Gives the requirements for sleeving having the property of expanding its internal diameter when compressed longitudinally and thereafter returning to its initial diameter after release of the compressing force. It is constructed of polyethylene terephthalate monofilament yarns suitably processed to provide the mechanical ability to conform in the manner described above. These sleevings have been…

This report is a Technical Report and is of a purely informative nature and is therefore by itself not to be regarded as an International Standard. It is to assist users of the standard with determining and recording verification of conformity of the equipment under test with the requirements of: IEC 61010-2-081: 2001The protocol for completion of this report is contained in publication IEC 61010…

This report is a Technical Report and is of a purely informative nature and is therefore by itself not to be regarded as an International Standard. It is to assist users of the standard with determining and recording verification of conformity of the equipment under test with the requirements of: IEC 61010-2-101: 2002 The protocol for completion of this report is contained in publication IEC…

This report is a Technical Report and is of a purely informative nature and is therefore by itself not to be regarded as an International Standard. It is to assist users of the standard with determining and recording verification of conformity of the equipment under test with the requirements of: IEC 61010-1: 2001 2nd edition The protocol for completion of this report is contained in publication…

This report is a Technical Report and is of a purely informative nature and is therefore by itself not to be regarded as an International Standard. It is for use by users to assist them with determining and recording verification of conformity of the equipment under test with the requirements of: IEC 61010-2-045: 2000 and EC 61010-1: 1990 + amendment 1:1992 + amendment 2:1995

ISO 3882:2003 reviews methods for measuring the thickness of metallic and other inorganic coatings on both metallic and non-metallic substrates. It is limited to tests already specified, or to be specified, in International Standards, and excludes certain tests that are used for special applications.

This International Standard defines the principal terms used in relation to the braking and braking equipment of motor vehicles, trailers or combinations of these as defined in ISO 3833. The terms it defines designate either systems or elements involved during the operation of braking, or the values characterizing the whole or a part of the operation.

This part of IEC 61000 sets high-altitude electromagnetic pulse (HEMP) immunity requirements for electrical and electronic equipment intended for use indoors. The indoor HEMP environment depends on the electromagnetic shielding quality of a facility and the level of protection against the conducted environment. This standard is intended for all facility types including residential, commercial,…