Search

This document describes procedures to measure outgassing rates from components designed for vacuum chambers and of vacuum chambers as a whole. The outgassing rates are expected to be lower than 10−5 Pa m3 s−1 (10−2 Pa L s−1) at 23 °C and to emerge from devices that are suitable for high or ultra-high vacuum applications. The molecular mass of the outgassing species or vapour is below 300 u. The…

This document sets out the basic methods for sampling copper, lead, zinc and nickel concentrates from moving streams and stationary lots, including stopped-belt sampling, to provide samples for chemical analysis, physical testing and determination of moisture content, in accordance with the relevant International Standards. Where the concentrates are susceptible to significant oxidation or…

This document supports the interest of system users in having consistent, complete, accurate, and usable information. It addresses both available approaches to standardization: a) process standards, which specify the way that information products are to be acquired and supplied; and b) information product standards, which specify the characteristics and functional requirements of the information…

This document supports the interest of system users in having consistent, complete, accurate, and usable information. It addresses both available approaches to standardization: a) process standards, which specify the way that information products are to be acquired and supplied; and b) information product standards, which specify the characteristics and functional requirements of the information…

IEC 60695-6-2:2018 provides a summary of commonly used test methods for the assessment of smoke obscuration. It presents a brief summary of static and dynamic test methods in common use, either as international standards or national or industry standards. It includes special observations on their relevance to electrotechnical products and their materials and to fire scenarios, and gives…

This document is applicable to cookstoves used primarily for cooking or water heating in domestic, small-scale enterprise, and institutional applications, typically with firepower less than 20 kW and cooking vessel volume less than 150 l, excluding cookstoves used primarily for space heating. For solar cookstoves, the provisions of this document are applicable only for evaluating cooking power,…

1.1.1 This Standard applies to: a) the mechanical and electrical features of newly manufactured stationary and mobile systems that dispense “cold” or “warm” liquefied natural gas for vehicles where such a system is intended primarily to dispense the fuel directly into the fuel storage container of the vehicle; b) LNG dispensers contained in a single housing; and c) LNG dispensers contained in…

This part of ISO 5356 specifies dimensional requirements for screw-threaded weight-bearing conical connectors intended for use with inhalation anaesthesia apparatus and ventilators. Such connectors are intended for mounting heavy accessories. This part of ISO 5356 specifies requirements for the following screw-threaded, weight-bearing conical connectors: — 22 mm connectors; — 22 mm/15 mm coaxial…

This Technical Specification gives definitions of terms in the field of sterilization technology. This Technical Specification does not provide requirements for the validation and routine control of a sterilization process, but is intended to contribute fundamentally towards mutual understanding amongst those preparing and using International Standards in the field of sterilization…

This International Standard provides essential performance and safety requirements for oro-tracheal and naso-tracheal tubes and tracheal tube connectors. Tracheal tubes with walls reinforced with metal or nylon, tracheal tubes with shoulders, tapered tracheal tubes, tracheal tubes with means for suctioning, monitoring or delivery of drugs or other gases, and the many other types of tracheal tubes…