Search

This National Standard of Canada is equivalent to International Standard ISO/IEC TR 18057:2004. 1 Scope Services for Computer Supported Telecommunications Applications are defined by Standard ECMA-269 and the XML Protocol for those services are defined by Standard ECMA-323. In many cases, applications require only a small subset of the features standardized in CSTA. In a voice browser…

ISO 13982-1:2004 specifies the minimum requirements for chemical protective clothing resistant to penetration by airborne solid particles (Type 5). These garments are full-body protective clothing, i.e. covering trunk, arms and legs, such as one-piece coveralls or two piece suits, with or without hood or visors, with or without foot protection. Requirements for component parts, such as hoods,…

This National Standard of Canada is equivalent to International Standard ISO 23328-1:2003, first edition. 1 Scope This part of ISO 23328 gives a short-term airborne sodium chloride particle challenge test method for assessing the filtration performance of breathing system filters (BSF) intended for the filtration of respired gases. This part of ISO 23328 is applicable to BSF used with a…

ISO 16604:2004 describes a laboratory test method for measuring the resistance of materials used in protective clothing to penetration by blood-borne pathogens. This test method uses a surrogate microbe under conditions of continuous liquid contact. Protective clothing "pass/fail" determinations are based on the detection of viral penetration at a specific hydrostatic pressure using the…

ISO 23328-1:2003 gives a short-term airborne sodium chloride particle challenge test method for assessing the filtration performance of breathing system filters (BSF) intended for the filtration of respired gases. ISO 23328-1:2003 is applicable to BSF used with a clinical breathing system. It is not applicable to other types of filter, e.g. those designed to protect vacuum sources or gas sample…

The most important tasks in cable current rating calculations are the determination of the conductor temperature for a given current loading or, conversely, the determination of the tolerable load current for a given conductor temperature. In order to perform these tasks the heat generated within the cable and the rate of its dissipation away from the conductor, for a given conductor material and…

1 Scope 1.1 This Standard provides requirements for public-use playspaces and play equipment intended for use by children aged 18 months to 12 years with anthropometric limits based on the 95th percentile. Notes: 1) The level of challenge required and desired by children varies enormously with age, physical development, and emotional development. Consequently, it is almost impossible to…

ISO/IEC 15433:2003 specifies the signalling protocol for the support of the Wireless Terminal Authentication supplementary services (SS-WTAT and SS-WTAN) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN). Authentication of a WTM user (SS-WTAT) is a supplementary service that enables a PISN…

ISO/IEC 15433:2003 specifies the signalling protocol for the support of the Wireless Terminal Authentication supplementary services (SS-WTAT and SS-WTAN) at the Q reference point between Private Integrated services Network eXchanges (PINXs) connected together within a Private Integrated Services Network (PISN). Authentication of a WTM user (SS-WTAT) is a supplementary service that enables a PISN…

This National Standard of Canada is equivalent to International Standard ISO/IEC 9798-4:1999 (second edition, 1999-12-15). 1 Scope This part of ISO/IEC 9798 specifies entity authentication mechanisms using a cryptographic check function. Two mechanisms are concerned with the authentication of a single entity (unilateral authentication), while the remaining are mechanisms for mutual…