Search

Establishes general principles for the design and application of safety signs and hazard pictorials permanently affixed to tractors, machinery for agriculture and forestry, and powered lawn and garden equipment as defined in ISO 3339-0 and ISO 5395. Outlines safety sign objectives, describes the basic safety sign formats and colours, and provides guidance on developing the various panels that…

This National Standard of Canada is equivalent to International Standard ISO 9000-2:1993. 1 Scope This part of ISO 9000 gives guidance to enable its users to have improved consistency, precision, clarity and understanding when applying the requirements of the quality systems standards ISO 9001, ISO 9002 and ISO 9003. This part of ISO 9000 is phrased in terms of guidance to the supplier…

This National Standard of Canada is equivalent to International Standard ISO 9004-3:1993. 1 Scope This part of ISO 9004 gives guidance on the application of quality management to processed materials. The selection of appropriate elements contained in this part of ISO 9004 and the extent to which these elements are adopted and applied by a company depend upon factors such as the market…

1.1 Cette norme énonce les prescriptions minimales relatives à la formation des caristes utilisant des chariots élévateurs des classes 1 à 7. Note. En raison des différents modèles de véhicules de la «classe 6», certains articles de cette norme peuvent ne pas s'appliquer. 1.2 Cette norme énonce les prescriptions générales relatives à la santé et à la condition physique des…

Deals with methods of measurment on Time Division Multiple Access (TDMA) terminal equipment. There are various types of TDMA systems which may differ, for instance, in the bit rate, the frame/burst format, and/or the acquisition and synchronisation scheme. The methods of measurement are described as generally as possible so that they may be applicable to various TDMA terminal equipment used in…

Traite des méthodes de mesure applicables à un équipement terminal à accès multiple par répartition dans le temps (AMRT). Il existe divers type de systèmes AMRT qui peuvent différer, par exemple, par le débit binaire, le format de la trame et du paquet, et/ou le principe de synchronisation et d'acquisition. La présente section décrit d'une manière aussi générale que possible les…

1.1 This standard covers gas-fired refrigerators having refrigerated spaces for (1) storage of foods, or (2) storage of foods and making ice, or (3) storage of frozen foods and making ice, or (4) storage of foods and the storage of frozen foods and making ice, hereinafter referred to as refrigerators or appliances. It applies to newly produced refrigerators constructed entirely of new,…

This National Standard of Canada is equivalent to the International standard ISO 5654/2:1985. This standard specifies the quality of recorded signals, track layout and the track format to be used on the above-mentioned flexible disk cartridge which is intended for data interchange between data processing systems. Note - Numeric values in the SI and/or Imperial measurement system in this…

This National Standard of Canada is equivalent to International Standard ISo 7065/2:1985. This standard specifies the magnetic characteristics, the track layout, and a track format to be used on a 200 mm (8 in) flexible disk cartridge, recorded at 13 262 ftprad on both sides using modified frequency modulation recording at a track density of 1,9 tracks per millimetre (tpmm) [48 tracks per…

This National Standard of Canada is equivalent to International standard ISo 6596/2:1985. This standard specifies the magnetic characteristics, the track layout, and a track format to be used on a 130 mm (5.25 in) flexible disk cartridge, recorded at 7 958 ftprad on one side using two-frequency recording at a track density of 1,9 tracks per millimetre (tpmm) [48 tracks per inch (tpi)],…