Search

1. PURPOSE AND SCOPE 1.1 The procedures that follow can be used to analyze mixtures of many commonly occurring textile fibres. In selecting these procedures, a number of possible methods were considered. Interlaboratory analyses of prepared fibremixtures of known composition were carried out, and only those methods found to be satisfactory were accepted. In most cases, the scope of the method is…

1. OBJET 1.1 Les modes opératoires suivants peuvent servir à analyser des mélanges constitués d'un certain nombre de fibres textiles communes. Le choix de ces modes opératoires résulte de l'étude de plusieurs méthodes possibles. Des analyses interlaboratoires ont été effectuées sur des mélanges de fibres préparés de composition connue et seules les méthodes jugées satisfaisantes ont…

ISO 15031-6:2005 provides recommended uniformity for alphanumeric trouble codes. It further provides guidance for uniform messages associated with these codes. ISO 15031-6:2005 specifies several sections addressing format, structure, messages, and a few examples, and is applicable to electrical/electronic systems diagnostics of motor vehicles.

IEC 61883-6:2005 describes a protocol for the transmission of audio and music data employing IEEE 1394 and specifies essential requirements for the application of the protocol. This protocol can be applied to all modules or devices that have any kind of audio and/or music data processing, generation and conversion function blocks. This document deals only with the transmission of audio and music…

IEC 61883-6:2005 describes a protocol for the transmission of audio and music data employing IEEE 1394 and specifies essential requirements for the application of the protocol. This protocol can be applied to all modules or devices that have any kind of audio and/or music data processing, generation and conversion function blocks. This document deals only with the transmission of audio and music…

This National Standard of Canada is equivalent to International Standard ISO/IEC 18092:2004. 1 Scope This International Standard defines communication modes for Near Field Communication Interface and Protocol (NFCIP-1) using inductive coupled devices operating at the centre frequency of 13,56 MHz for interconnection of computer peripherals. It also defines both the Active and the Passive…

This National Standard of Canada is equivalent to International Standard ISO/IEC 18000-1:2004. 1 Scope 1.1 This part of ISO/IEC 18000 describes the generic architecture concepts in which item identification may commonly be required within the logistics and supply chain and defines the parameters that need to be determined in any standardized air interface definition in the subsequent parts…

This National Standard of Canada is equivalent to International Standard ISO/IEC 15423:2004. This International Standard defines the test equipment and procedures to and decoding equipment. It deals with bar code scanning and decoding equipment both as integrated reading systems and as discrete units. It d configuration (e.g. a specific model) irrespective of the individual com operational…

1. OBJET 1.1 La présente méthode porte sur le dosage semi-quantitatif (±25%1) de l'éthylmercaptan (concentration comprise entre 5 et 85 mg/L) utilisé pour odoriser le propane liquide. Cette méthode se révèle utile pour confirmer que du propane qui vient d'être odorisé présente la concentration d'odorisant requise. La présente méthode est destinée à être utilisée sur le terrain…

1. SCOPE 1.1 This method describes a procedure for determining the filter plugging tendency of diesel fuels at low temperature usually due to the formation of wax crystals (see Note after par. 6.1). 1.2 The method applies to all distillate diesel fuels. Fuels passing this test are expected to provide satisfactory fuel flow in automotive equipment at temperatures equal to or higher than…