Search

1.1 These requirements cover hose nozzle valves that are intended to be used for the control of motor fuels as indicated in 1.2. They are of the type used in motor fuel dispensing equipment. Hose nozzle valves covered by this...

Note: The scope for this NOI (originally published on June 28, 2022) was updated by the responsible SDO on June 27, 2023 . This National Standard of Canada applies to four types of middle distillate fuel oils that are...

This clause of Part 1 is replaced by the following. This International Standard deals with the safety of cosmetic and beauty care appliances incorporating lasers or intense light sources for household and similar purposes...

1.1 This Standard covers insulated multi-pole mating or non-mating splicing wire connectors intended for field wiring and factory wiring for use in accordance with the Canadian Electrical Code, Part I, in Canada, and NFPA 70...

This document specifies requirements for the qualification and certification of personnel who perform industrial non-destructive testing (NDT) in the following methods. a) acoustic emission testing; b) eddy current testing; c...

1.1 These requirements cover emergency breakaway fittings, swivel connectors and pipe-connecting fittings of the threadless compression type. Connectors and fittings covered by these requirements are intended only for the...

1.1 This Standard applies to the construction, performance, and installation procedures for a newly produced automatic damper device (hereinafter referred to as device) constructed entirely of new, unused parts and materials...

Note: The scope for this NOI (originally published on January 16, 2024) was updated by the responsible SDO on November 26, 2024. 1.1 These requirements cover Power Control Systems (PCS) used in Distributed Energy Resource...

Note: As requested by the responsible SDO, this NOI being reissued as the standard was in the initial stages of development for more than 12 months. An additional comment period of November 26, 2024 to December 17, 2024...

1 SCOPE 1.1 (REV1) This Standard covers minimum requirements for shop fabricated aboveground protected tank assemblies that are used for the storage of flammable and combustible liquids with a specific gravity not greater...

1.1 These requirements cover hose nozzle valves that are intended to be used for the control of motor fuels as indicated in 1.3. They are of the type used in motor fuel dispensing equipment. Hose nozzle valves covered by this...