Search

This method determines the flame spread properties of a textile or product when a specimen is supported at an angle of 45º and a flame is applied to its upper surface for 1 s.

This method describes a procedure for the removal, prior to testing for flame resistance, of non-permanent flame-retardant treatments applied to textile floor-covering materials.

This method describes a procedure for determining the shrinkage that may occur in a fabric as a result of dry cleaning. The procedures for determining the dimensional changes as a result of wet cleaning are covered in CAN...

This method evaluates the appearance of existing seams in garments after repeated domestic launderings involving machine washing and drying. A seaming technique is not included since the purpose of this procedure is to...

This method determines alteration in appearance, delamination and dimensional change of coated, bonded, laminated and fused fabrics as a result of hand or machine laundering.

1 Scope This document aims to define the requirements and method used to determine particle size distribution of disintegrated pellets. It is applicable for pellets that fully disintegrate in hot water.

1 Scope This document specifies a method for determining the amount of material passing through a sieve with 3,15 mm diameter round hole.

This document is applicable to insulated , insulating and hybrid hand tools used for working live or close to live parts at nominal voltages up to 1 000 V AC and 1 500 V DC. The products designed and manufactured according to...

This part of ISO/IEC 18014: - identifies the objective of a time-stamping authority; - describes a general model on which time-stamping services are based; - defines time-stamping services; - defines the basic protocols...