Search

This method determines the conditioned mass of fabrics. It is primarily for use in the laboratory. Unit mass of fabric is usually calculated on the basis of mass per square meter or mass per meter of full width fabric.

This method assesses the fastness of the colour of textile materials to wetting with water. It is applicable to dyed, printed and otherwise coloured fibres, yarns and fabrics of all kinds. In the case of multicoloured...

This part of ISO/IEC 11694 defines the physical characteristics of optical memory cards using the linear recording method.

This method determines the dimensional changes (shrinkage or stretch) that may occur in a fabric as a result of relaxation of strain when subjected to open-head steaming on a stream pressing machine.

This method determines the resistance of textile fabrics to penetration by water under pressure higher than those obtained with CAN/CGSB-4.2 No. 26.3-M. It is intended primarily for use with coated fabrics.

This method determines the amount of copper in textile materials using flame atomic absorption.

This method measures the thickness of textile fabrics as determined between parallel plane surfaces under an arbitrary pressure. Since all textile fabrics are compressible, the thickness measured will depend upon the pressure...

Specifies general performance requirements for washer-disinfectors (WD) and their accessories that are intended to be used for cleaning and disinfection of re-usable medical devices and other articles used in the context of...

This document specifies the particular requirements, including performance criteria for washer-disinfectors (WD) that are intended to be used for cleaning and chemical disinfection of thermolabile endoscopes

This method assesses the combustion resistance of mattresses when in contact with a lighted cigarette. This method covers the resistance of mattresses to ignition only by a burning cigarette and does not relate to their...

This part of ISO/IEC 23004 defines the architecture of the MPEG Multimedia Middleware (M3W) technology

This part of ISO/IEC 23004 defines the Multimedia Middleware (M3W) Component Model and Core Framework. The context of the M3W Component Model and Core Framework is described in ISO/IEC 23004-1.