Search

This Standard, together with IEC 61851-23, applies to digital communication between a d.c. EV charging station and an electric road vehicle (EV) for control of d.c. charging, with an a.c. or d.c. input voltage up to 1 000 V a...

This Standard, gives the requirements for d.c. electric vehicle (EV) charging stations, herein also referred to as "DC charger", for conductive connection to the vehicle, with an a.c. or d.c. input voltage up to 1 000 V a.c...

1.1 This Standard applies to ground fault circuit interrupters (GFCIs) intended for installation in non-hazardous locations at nominal system voltages of 600 V and less, in accordance with CSA Standard C22.1, Canadian...

1.1 This standard applies to panel’s manufactures primarily from interfelted ligno-cellulosic fibers (usually wood), consolidated under heat and pressure in a hot press to a minimum density of 500 kg/m3. It identifies a...

1.1 This standard specifies the code for the ready identification of the contents of portable medical gas containers and pipelines by name, symbols and colors, and for the ready identification of valve outlets by a non...

1.1 This standard applies to two types of non-inhibited phosphoric acid metal conditioners which, when diluted with water, will remove rust from metal in the presence of light grease and oil and provide slight etching action...

1.1 This standard applies to breather type sheathing membranes intended for use on the outside of heated buildings, under the external finish, as a secondary protective covering against the entry of wind and moisture. They...

1.1 This standard applies to flexible sheet material made from low-density polyethylene, primary intended for use in building construction to retard the passage of moisture and water vapor. The purpose of this standard is to...

1.1This standard applies to poly (vinyl chloride) (PVS) sheet used as jacketing over insulated surfaces of vessels and round ducts, or performed jacketing for pipe elbow, tees, etc where the surface temperature is between...

1.1 This standard applies to two types of vapour barrier jacket and facing material comprised of aluminum foil, glass fibre scrim and paper laminated with adhesive, for use in the temperature range of -20 to 65ºC over thermal...

1.1 This standard applies to a flexible, enclosed lens type of retroreflective marking material which can be attached to safety clothing, life-saving jackets or related equipment, to provide them with a high degree of...

1.1 This International Standard establishes general principles for the sampling of geotextiles and preparation of test specimens from the samples. 1.2 The sampling principles are applicable to geotextiles supplied in rolls...