Search

This clause of Part 1 is applicable, except as follows: Addition: This standard applies to routers and trimmers.

1.1 This Standard applies to cord-connected, electrically heated bedding such as blankets, comforters, quilts, sheets, mattresses, and mattress pads with associated control units, for household use, designed for nominal 120 V...

1.1 This Standard specifies the test methods to be used for determining the characteristics of station post insulators. 1.2 Individual tests shall be made only when specified. 1.3 This Standard covers tests applicable to...

These requirements cover the construction and performance, exclusive of performance during fire tests, of portable dry chemical and dry powder (Class D) fire extinguishers. Dry chemical and dry powder fire extinguishers are...

This Part applies to Class T fuses rated 1200 A or less and 300 V ac, 800 A or less and 600 V ac. DC ratings are optional.

This Part applies to supplemental fuses rated 60 A or less and intended only for supplementary overcurrent protection where branch circuit or equivalent applications are not involved. DC ratings are optional.

This Standard contains safety objectives and representative construction requirements intended to meet the safety objectives for service entrance equipment installed in accordance with the requirements of the Canadian...

This International Standard specifies requirements for metallic, non-metallic and composite cable ties and their associated fixing devices used for the management and support of wiring systems in electrical installations...

This Part applies to semiconductor fuses rated 2000 A or less. DC ratings are optional. NOTE: The Canadian Electrical Code, Part I, defines low voltage as any voltage from 31 to 750 V inclusive and high voltage as any voltage...

This Part applies to Class C fuses rated 1200 A or less and 600 V ac. DC ratings are optional.

This Standard sets forth minimum requirements for sacrificial magnesium and zinc anodes and zinc reference electrodes which are intended for use in the cathodic protection of steel underground tanks which have been coated and...

These requirements cover low profile nylon isolating bushings with internal and external threads and component thread sealant which are intended for use in the external corrosion protection of underground steel tanks which...