Search

This method describes the burning behaviour tests from the CAN/CGSB-4.2 No. 27 Series and recommends which should be used to determine the burning behaviour of different products under various defined conditions.

This method describes a procedure for the removal, prior to testing for flame resistance, of non-permanent flame-retardant treatments applied to textile floor-covering materials.

This method describes a procedure for determining the shrinkage that may occur in a fabric as a result of dry cleaning. The procedures for determining the dimensional changes as a result of wet cleaning are covered in CAN...

1 Scope This document specifies a method for determining the amount of material passing through a sieve with 3,15 mm diameter round hole.

This standard applies to flat, transparent, clear sheet glass having glossy, fire-finished, apparently plane and smooth surfaces, but having a characteristic waviness of surface, for glazing, mirrors and other uses.

This standard applies to flat, clear glass of the float type produced by floating the glass on a bath of molten metal.

1.1 This standard applies to transparent (one-way) mirrors of polished plate, float or sheet glass, and intended for observation rooms.

1.1 This standard applies to glass intended for installation in spandrel areas of building exteriors. It also provides requirements so that such glass shall not pose a safety hazard in a specific application for which it is...

This standard applies to flat, translucent, rolled or cast glass having a pattern or figure on one or both surfaces, used primarily in buildings for doors, windows, interior and exterior walls and for decorative purposes.

1 Scope This document aims to define the requirements and method used to determine particle size distribution of disintegrated pellets. It is applicable for pellets that fully disintegrate in hot water.

This Standard provides a detailed description of the Organization Normative Framework and provides guidance to organizations for its implementation

This Standard specifies requirements and guidelines for the design, manufacture, installation, function, performance, maintenance, servicing, documentation, testing, and commissioning of equipment for evacuation of plume...