Search

This method of test for flammability characteristics is applicable to certain low density insulating materials that do not melt or drip during exposure to fire (see Appendix A). It is used in establishing the Flame Spread...

1.1 This Standard applies to rigid PVC (unplasticized) conduit, elbows, bends, and couplings, intended for use at a continuous operating temperature of 75 °C, for the installation of wires and cables in accordance with the...

This Standard sets forth minimum requirements for the material properties and performance of liners used for secondary containment under and around the area of tanks that are installed aboveground for the storage of flammable...

PURPOSE AND SCOPE This standard specifies the characteristics and test methods relating to unplasticized poly(vinyl chloride) [PVC-U] pipe having a nominal diameter ranging from 100 mm to 1500 mm. This standard applies to...

PURPOSE AND SCOPE This standard specifies the characteristics and test methods relating to unplasticized poly(vinyl chloride) [PVC-U] pipe having a nominal diameter ranging from 100 mm to 1500 mm. This standard applies to...

1.1 This Standard covers pressurized flushing devices (PFDs) intended to flush water closets, urinals, and other plumbing fixtures and specifies requirements for materials, design, methods of operation, test methods, and...

1.1 This Standard covers anti-siphon fill valves intended to be installed in water closet tanks. Note: In this Standard, anti-siphon fill valves are also referred to as "devices". 1.2 In this Standard, "shall" is used to...

1.1 This Standard applies to manufactured and modular homes designed to be supported on longitudinal floor beams. Note: For simplicity, the term "manufactured home" is used in this Standard to refer to both manufactured homes...

Scope 1.1 This Standard covers drinking water treatment systems that are (a) point-of-use or point-of-entry plumbed systems; and (b) point-of-use non-plumbed systems. Note: Drinking water treatment systems covered by this...

1. Scope 1.1 This Standard applies to complete, vent- (flue-) connected, oil-fired warm air appliances, irrespective of the heating capacity or the type of burner used. 1.2 This Standard applies to appliances (a) intended for...

1.1 This Standard specifies the methods to be used for measuring the energy consumption and drum volume of household electric tumble-type clothes dryers and for evaluating their energy performance. This Standard also...