Search

1.1 This Standard covers requirements for vapor corrosion inhibitors and their delivery system for use in fire sprinkler systems. 1.2 These corrosion inhibitors are intended for use in dry pipe and pre-action sprinkler...

This standard specifies the test method to evaluate the reaction of wall and ceiling products to fire when installed at the surface of a small room and exposed directly to a specified ignition source. The test represents a...

2.1 This laboratory guide has been developed for the assessment of volatile organic compound emissions from materials used in residential buildings. 2.2 This laboratory guide specifies recommended procedures for the use of...

1.1 This Standard provides minimum requirements for primary containment leak detection that uses qualitative characteristics to detect leaks in the primary containment. NOTE: Depending on the design of the tank system, and...

This Standard provides the physical property requirements and test methods to determine the material properties for medium density closed cell spray-applied rigid polyurethane foam, used for thermal insulation or for other...

1 SCOPE 1.1 This Standard sets forth minimum design and construction requirements for fibre reinforced plastic, non-pressure tanks that are used for the underground storage of flammable and combustible liquids, such as: A...

This Standard specifies requirements for establishing and maintaining an exposure control program for engineered nanomaterials in the workplace in accordance with occupational health and safety management system (OHSMS)...

1 SCOPE 1.1 This Standard covers construction and performance requirements for control units and accessories for intrusion alarm systems, including: A Protected premises control units and accessories for local or signal...

1.1 These requirements cover lining systems for new masonry chimneys . 1.2 Liners are for use with gas, liquid and solid fuel fired residential appliances and building heating equipment, where the flue gas temperatures...

1.1 General This Standard specifies requirements, in accordance with the National Building Code of Canada, for the design and strength evaluation of a) structures of reinforced and prestressed concrete; and b) plain concrete...

This document specifies requirements for the qualification and certification of personnel who perform industrial non-destructive testing (NDT) in the following methods. a) acoustic emission testing; b) eddy current testing; c...

1 Scope 1.1 This document specifies the physical property requirements and test methods used to verify compliance of those material properties for low pressure spray applied rigid two-component polyurethane foam for use as...