Search

This standard specifies Bridges that interconnect individual LANs, each supporting the IEEE 802 MAC Service using a different or identical media access control method, to provide Bridged Networks and VLANs

.1 This standard designates a system of symbols to be used in the labelling of textiles to indicate the preferred care procedures for restoring the textiles to an acceptable usable condition with respect to the properties...

This Standard addresses the construction and use of test suites for verifying conformance of SGML systems. Its provisions assist those who build test suites, those who build SGML systems to be evaluated by such suites, and...

This clause of Part 1 is replaced as follows: 1.1 This part of IEC 60730 applies to automatic electrical air flow, water flow and water level sensing controls for use in, or in association with, boilers with a maximum...

This clause of Part 1 is replaced as follows: 1.1 This part of IEC 60730 applies to automatic electrical air flow, water flow and water level sensing controls for use in, or in association with, boilers with a maximum...

This Standard contains safety objectives and representative construction requirements intended to meet the safety objectives for service entrance equipment installed in accordance with the requirements of the Canadian...

This International Standard lays down requirements for the design qualification and type approval of terrestrial, thin-film photovoltaic modules suitable for long-term operation in general open-air climates as defined in IEC...

This part of ISO/IEC 7811 is one of a series of standards describing the parameters for identification cards as defined in the definitions clause and the use of such cards for international interchange. This part of ISO/IEC...

This part of ISO/IEC 15408 establishes the general concepts and principles of IT security evaluation and specifies the general model of evaluation given by various parts of the International Standard which in its entirety is...

This Standard applies to track systems with two or more poles for the connection of luminaires to the electrical supply, either of rated voltage not exceeding 300 V between poles, 150 Volts-to-ground with the provision for...

This International Standard describes a method for the determination of the water soluble chloride, sodium and potassium content in solid biofuels by extraction with water in a closed container and their subsequent...

The purpose of this Standard is to provide requirements for the design, construction, initial inspection and testing, marking, periodic inspection and testing, and repair of UN pressure receptacles and multiple-element gas...