Search

1 Scope 1.1 These requirements cover metallic and nonmetallic safety cans that have a maximum capacity of 5.3 US gallons (20 L) and that are intended to store and handle flammable and combustible liquids in commercial and...

1.1 This Standard covers the design and construction of aboveground steel non-pressure tanks intended for installation inside or outside buildings and for the storage of: A Combustible liquid intended to be used as heating...

1.1 Inclusions 1.1.1 This International Standard specifies general requirements for the characterization of a sterilizing agent and for the development, validation and routine monitoring and control of a sterilization process...

1 General Replace this clause of the RD with the following: 1.1.1 Equipment covered by this Standard This Standard applies to UNINTERRUPTIBLE POWER SYSTEMS (UPS). The primary function of the UPS for this Standard is to ensure...

Note: The title, stanadard designation number, scope, project need and ICS code for this NOI (originally published on May 4, 2021) was updated by the responsible SDO on January 16, 2024. 1.1 General This Standard provides...

1 General Replace this clause of the RD with the following: 1.1.1 Equipment covered by this Standard This Standard applies to UNINTERRUPTIBLE POWER SYSTEMS (UPS). The primary function of the UPS for this Standard is to ensure...

1.1 This Standard provides a calculation method for determining the heat loss and heat gain of buildings (as described in Clause 1.3 below) for the purpose of selecting the appropriate output capacity of a space heating...

1.1 These requirements and methods of test apply to fire damper assemblies rated ¾ h, 1 h, 1½ h, 2 h, or 3 h for use in air-conditioning and ventilating system ducts or openings (without ducts) piercing horizontally or...

1.1 These requirements cover vault doors and vault modular panels (for use in the construction of vault floors, walls and ceilings), of the type intended for use in financial institutions, commercial, industrial and...

2.1 Type of Equipment This Standard applies to fusion welded wrought steel enclosures pressurized with dry air, inert gases, eg, sulphur hexafluoride, carbon tetrafluoride, or nitrogen or a mixture of such gases, used in...

1.1 Application This Standard applies to single- and multi-section buildings supported on longitudinal floor beams, or perimeter rim joists designed to perform as beams. 1.2 Issues addressed This Standard specifies...

1.1 These requirements cover permanently installed devices, hereafter referred to as dimmers, that employ a dimming function intended for control of lighting loads of the magnetic ballast, transformer, electronic ballast...