Search

This National Standard of Canada applies to terry towels and towelling. It states the requirements for cotton and cotton/polyester commercial towels and for cotton/polyester utility/institutional towels and towelling.

This standard applies to electrically operated bells, sirens, horns, and similar audible signaling devices, rated at 300 V or less, for fire alarm and signaling systems and intended for indoor and/or outdoor installation: a)...

This National Standard of Canada applies to fabric of three different masses per unit area (105 g/m2, 150 g/m2 and 170 g/m2) made from yarns that are a blend of 65% polyester and 35% cotton.

CSA Group proposes to develop a national, consensus-based, voluntary standard for the provision of manual osteopathic care. The proposed scope of the standard is intended to specify requirements and recommendations for the...

These requirements cover electrically operated single and multiple station smoke alarms intended for open area protection in indoor locations and portable smoke alarms used as "travel" alarms in accordance with: a)...

1 Scope 1.1 These requirements cover automatic, non-automatic, and manual transfer switches, operating at voltages of 1000 V ac and higher, and intended for use in ordinary locations to provide for power as follows: a)...

The scope of this project is to develop an evidence-informed National Standard on First Responder Workplace Fatigue Risk Management and related tools which will be used across Canada to improve first responder health and...

201.1.1 Scope [Add the following] This Standard covers ME EQUIPMENT that is intended to be installed or used in accordance with CSA C22.1, Canadian Electrical Code, Part I. 201.2 Normative references [Add the following to the...

These requirements cover the construction and operation of inert gas clean agent fire extinguishing system units intended to be installed, inspected, tested, and maintained in accordance with the Standard for Clean Agent Fire...

These requirements cover the construction and operation of inert gas clean agent fire extinguishing system units intended to be installed, inspected, tested, and maintained in accordance with the Standard for Clean Agent Fire...

1.1 This Standard specifies minimum requirements for masonry materials and masonry construction. Notes: 1) Requirements for structural design of masonry are specified in CSA S304. 2) If a requirement specified in Part 9 of...

These requirements cover the construction and operation of inert gas clean agent fire extinguishing system units intended to be installed, inspected, tested, and maintained in accordance with the Standard for Clean Agent Fire...