Search

1.1 General This fenestration Standard/Specification applies to both operating and fixed, new construction and replacement windows, doors, SSPs, TDDs, roof windows, and unit skylights installed into exterior building...

1.1 These requirements cover heat actuated fire detectors in ordinary (nonhazardous) and outdoor locations, for use as components in automatic fire protective systems, to be installed in accordance with the Standard for the...

These requirements cover polyvinyl chloride (PVC) pressure pipe, machined couplings, fabricated fittings and gaskets and oriented polyvinyl chloride (PVCO) pressure pipe and gaskets for use in underground fire protection...

The test method in this Standard determines the wind resistance of vegetated roof assembly when subjected to dynamic wind flow and dynamic wind uplift in laboratory conditions.

.1 This test method determines the wind uplift resistance of membrane-roofing systems when subjected to dynamic wind load cycles. The test methods are applicable to a) mechanically attached membrane roofing systems; and b)...

This Standard covers the construction, operation, installation, inspection and tests applicable to fire signal receiving centres for fire protective signalling services utilizing fire signal receiving centre facilities and...

1.1 These requirements cover regulators used to reduce the pressure of compressed industrial gases from a source or storage cylinder pressure of not more than 5500 psig (37.91 MPa) to the use pressure. 1.2 Regulators covered...

1.1 This Standard sets forth the minimum requirements for steel contained tank assemblies that are used for aboveground storage of flammable and combustible liquids such as gasoline, fuel oil, or similar products with a...

The requirements in this Standard apply to frame assemblies for swinging fire doors. These frame assemblies have demonstrated performance in fire tests sufficient to warrant their use with fire doors which have been assigned...

1.1 These requirements cover chemical, physical and performance properties of dry chemical fire extinguishing agents for use in portable fire extinguishing equipment being evaluated to CAN/ULC-S504, Standard for Dry Chemical...

This method of test for surface burning characteristics of building materials is applicable to any type of building material that, by its own structural qualities or the manner in which it is applied, is capable of supporting...

This part of IEC 61000 for EMC immunity requirements applies to electrical and electronic apparatus intended for use in industrial environments, as described below. Immunity requirements in the frequency range 0 Hz to 400 GHz...