Search

1 Scope 1.1 This standard sets forth minimum requirements for metallic and nonmetallic safety cans: a) With a maximum capacity of 5.3 US gallons (20 L); b) With a minimum capacity of 8 US fl oz (236 mL); c) That are intended...

These requirements and methods of test apply to fire damper assemblies rated ¾ h, 1 h, 1½ h, 2 h, or 3 h for use in air-conditioning and ventilating system ducts or openings (without ducts) piercing horizontally or vertically...

1.1 These requirements cover: a) Meters for flammable and combustible liquids, of the type and size commonly used in the assembly of motor fuel dispensing devices; and b) Meters for liquefied petroleum gas (LP-Gas), of the...

1.1 This Standard sets forth the minimum requirements for steel contained tank assemblies that are used for aboveground storage of flammable and combustible liquids such as gasoline, fuel oil, or similar products with a...

1.1 These requirements cover pressure regulators for use with LP-Gas equipment. NOTE: For the purposes of this standard the terms “LP-Gas” and “Propane” are interchangeable. 1.2 Regulators covered by these requirements are...

1.1 These requirements and methods of test apply to fire damper assemblies rated ¾ h, 1 h, 1½ h, 2 h, or 3 h for use in air-conditioning and ventilating system ducts or openings (without ducts) piercing horizontally or...

These requirements and methods of test apply to fire damper assemblies rated 3/4 h, 1 h, 1-1/2 h, 2 h, or 3 h for use in air-conditioning and ventilating system ducts or openings (without ducts) piercing horizontally or...

1.1 This Standard sets forth minimum design and construction requirements for non-pressure horizontal cylindrical steel tanks that are used for underground storage of flammable and combustible liquids. In addition to this...

This Standard establishes requirements for combination door closers-holders equipped with integral electromechanical or electromagnetic holders and which may be provided with integral smoke detectors intended for use with...

1.1 This Standard sets forth minimum requirements for primary carrier, secondary containment, integral primary/secondary , normal vent and vapour recovery , metallic , composite and nonmetallic pipe, fittings, and systems...

1.1 This Standard sets forth minimum requirements for emergency breakaway fittings, swivel connectors and pipe-connecting fittings of the threadless compression type. Connectors and fittings covered by these requirements are...