Search

This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to mixers. Mixers are not considered to be tools with a liquid system. This standard does not apply to drills and impact drills...

This Standard deals with the safety of electric vacuum cleaners and water-suction cleaning appliances for household and similar purposes, including vacuum cleaners for animal grooming, their rated voltage being not more than...

Mobility for enterprise communications is the ability for persons and objects (e.g. vehicles, sensors and other machines) belonging to the enterprise to use communication and information services regardless of changes in...

1. Scope This part of ISO/IEC 14165 defines mappings for transporting Fibre Channel frames across ATM, SONET and TCP/IP backbone networks. This part of ISO/IEC 14165 consists of three distinct Fibre Channel mappings resulting...

1. Scope This standard addresses the construction and use of test suites for verifying conformance of SGML systems. Its provisions assist those who build test suites, those who build SGML systems to be evaluated by such...

1.1 Scope This part of IEC 60947 applies to the types of equipment listed in 1.1.1 and 1.1.2 whose main contacts are intended to be connected to circuits the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c...

1.1 Scope This part of IEC 60947 applies to the types of equipment listed in 1.1.1 and 1.1.2 whose main contacts are intended to be connected to circuits the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c...

his part of ISO/IEC 14776 defines the SCSI command set extensions to access multimedia features for all classes of SCSI devices. The commands specified within this standard define standard access and control of those features...

This part of ISO 15883 specifies general performance requirements for washer-disinfectors (WD) and their accessories that are intended to be used for cleaning and disinfection of re-usable medical devices and other articles...

This part of IEC 60745 deals with the safety of hand-held motor-operated or magnetically driven electric tools, the rated voltage of the tools being not more than 250 V for single-phase a.c. or d.c. tools, and 440 V for three...

Scope: CSA ISO/IEC 14443-3:19 This document describes the following: polling for proximity cards or objects (PICCs) entering the field of a proximity coupling device (PCD); the byte format, the frames and timing used during...

POSIX.1-2008 defines a standard operating system interface and environment, including a command interpreter (or "shell"), and common utility programs to support applications portability at the source code level. It is...