Search

This Standard specifies safety and performance requirements for electrically powered medical and surgical suction equipment. It applies to equipment used in health care facilities such as hospitals, for domiciliary care of...

1. Scope [Replace this clause with the following] This Standard covers the electrical and mechanical characteristics of round wires of aluminium 1350-H19, having diameters of 1.25 to 6.50 mm, intended for stranding into...

This clause of Part 1 is applicable, except as follows: Addition: This Standard applies to chain saws for cutting wood and designed for use by one person. This Standard does not cover chain saws designed for use in...

Scope General This guideline incorporates ergonomics into a step-by-step process for the optimal design of office systems, including the design of jobs and work organization, layout of the office, environmental conditions...

1.1 The purpose of this Standard is to define common media for the transferring of information from sources, including the embossed characters on a card, by means of imprinting equipment. 1.2 The existence of two standards in...

Replacement: This particular standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of ELECTROCARDIOGRAPHS as defined in 201.3.63 intended by themselves or as a part of an ME SYSTEM, for the production of ECG REPORTS...

This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable table saws with – a toothed single blade; or – stacked blades that cut a single groove or slot; or – a moulding...

Introduction The Advanced Message Queuing Protocol is an open internet protocol for business messaging. AMQP is comprised of several layers. The lowest level defines an efficient, binary, peer-to-peer protocol for...

This clause of Part 1 is applicable, except as follows: 1.1 Addition: This Standard applies to grinders, with a rated speed not exceeding a peripheral speed of the accessory of 80 m/s at rated capacity, polishers and disk...

1. Overview This standard prescribes a continuous process for risk management. Clause 1 provides an overview and describes the purpose, scope, and field of application, as well as prescribing the conformance criteria. Clause...

This clause of Part 1 is applicable, except as follows: Addition: This standard applies to chain saws for cutting wood and designed for use by one person. This standard does not cover chain saws designed for use in...

This Standard covers press connections made with: (a) copper or copper alloy fittings and Type K, L, and M copper tube; (b) carbon steel fittings and Schedule 10 and 40 carbon steel pipe; (c) stainless steel fittings and...