Search

This method contains procedures for finishing (smoothing) fabric after washing or dry cleaning. Three principal methods of pressing and a procedure for restoration after dimensional change are described. These procedures are...

1.1 This Standard defines essential elements for the selection, use, and maintenance of rigid sterilization containers. The selection criteria include minimum construction and performance requirements to help health care...

1.1 Organization and Content This standard sets out the requirements for the design, manufacture, testing and inspection of non-refillable containers with a capacity of not more than 1 L and their selection and use for the...

This part of ISO 19085 gives the safety requirements for horizontal beam panel circular sawing machines with the saw carriage of the front cutting line mounted below the work-piece support, which are manually or powered...

This National Standard of Canada applies to the minimum requirements for performance of fireline workwear used for the protection against the adverse effects to the firefighter’s body during wildland firefighting, or...

1.1 This International Standard specifies a method for the determination of the direction of twist in yarns, the amount of twist, in terms of turns per unit length, and the change in length on untwisting, by the direct...

1.1 This Standard provides the physical property requirements and test methods to determine the material properties for medium density closed cell spray-applied rigid polyurethane foam, used for thermal insulation or for...

This National Standard of Canada applies to three grades of aviation turbine fuel (military grades F-34, F- 37 as its equivalent, and F-44) consisting of conventional hydrocarbons, synthetic hydrocarbons, naturally occurring...

Note: The standards development activity was updated to "new edition" by the responsible SDO on June 24, 2020. 1 SCOPE 1.1 This Standard covers the refurbishing of shop fabricated tanks built to nationally recognized...

This National Standard of Canada applies to two grades of kerosene-type aviation turbine fuel (grades JET A and JET A-1), consisting of conventional hydrocarbons, synthetic hydrocarbons, naturally occurring non-hydrocarbons...

This standard applies to three types of middle distillate fuel oils that are suitable for use in liquid-fuel-burning equipment without preheating (Types 0, 1 and 2), and three types of fuel oils that contain residual fuel...

1.1 This Standard provides procedures for evaluating polymeric materials and parts made from polymeric materials intended for application in electrical equipment covered by the Canadian Electrical Code, Part II (CEC, Part II)...