Search

1.1 Scope This part of IEC 60947 applies to the types of equipment listed in 1.1.1 and 1.1.2 whose main contacts are intended to be connected to circuits the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c...

1.1 Scope This part of IEC 60947 applies to the types of equipment listed in 1.1.1 and 1.1.2 whose main contacts are intended to be connected to circuits the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c...

This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable table saws with - a toothed single blade; or - stacked blades that cut a single groove or slot; or - a moulding...

This part of IEC 61496 specifies general requirements for the design, construction and testing of electro-sensitive protective equipment (ESPE) for the safeguarding of machinery. Special attention is directed to functional...

Note: Scope updated August 28, 2018 as per a request from the responsible SDO. (NOI originally published to CNS on April 17, 2017) This Standard gives minimum requirements for ventilators used in buildings which are designed...

NOTE - See the rationale in annex M. This part of ISO 10651 is one of a series of International Standards based on IEC 601-1:1988 (the "General Standard"); this type of International Standard is referred to as a "Particular...

2. Scope and Field of Application 2.1 Type of Equipment This Standard applies to welded composite enclosures of cast and wrought aluminium and aluminium alloy enclosures pressurized with dry air, inert gases, eg, sulphur...

2. Scope and Field of Application 2.1 Type of Equipment This Standard applies to fusion welded wrought steel enclosures pressurized with dry air, inert gases, eg, sulphur hexafluoride, carbon tetrafluoride, or nitrogen or a...

2. Scope and Field of Application 2.1 Type of Equipment This Standard applies to fusion welded wrought aluminium and alu minium alloy enclosures pressurized with dry air, inert gases, eg, sulphur hexafluoride, carbon...

Scope and object This part of IEC 61730 describes the fundamental construction requirements for photovoltaic (PV) modules in order to provide safe electrical and mechanical operation during their expected lifetime. Specific...

This Standard provides the physical property requirements and test methods to determine the material properties for medium density closed cell spray-applied rigid polyurethane foam, used for thermal insulation or for other...

This part of IEC 61400 specifies a procedure for measuring the power performance characteristics of a single wind turbine and applies to the testing of wind turbines of all types and sizes connected to the electrical power...