Search

1.1 This Standard applies to control and protective devices, and accessory devices, rated at not more than 1500 V, for starting, stopping, regulating, controlling, or protecting electric motors, generators, heating apparatus...

1.1 General 1.1.1 This Standard provides guidelines for the commissioning of buildings and all energy and domestic water related building systems. It applies to new construction only for Part 3 buildings, as specified in the...

This procedure defines the long-term thermal resistance (LTTR) of a foam product as the value measured after 5-year storage in a laboratory environment and provides means for its prediction based on an accelerated laboratory...

201.1.1 Scope Replacement: This part of IEC 60601 applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of INFANT TRANSPORT INCUBATOR equipment, as defined in 201.3.208, also referred to as ME EQUIPMENT. If a clause or...

Note: As requested by the responsible SDO, this NOI being reissued as the standard was in the initial stages of development for more than 12 months. An additional comment period of September 17 to October 9, 2024 (originally...

1.1 This Standard applies to gas convenience outlets, hereinafter referred to as gas outlets and optional enclosures, not to exceed 1-1/2 in (38.1 mm) and pressures not to exceed 5 psi (34.5 kPa), capable of operation at...

201.1.1 * Scope IEC 60601-1:2005+A1:2012, 1.1 is replaced by: This particular standard is applicable to the BASIC SAFETY and ESSENTIAL PERFORMANCE of oxygen CONSERVING EQUIPMENT, hereafter referred to as ME EQUIPMENT, in...

IEC 60601-1:2005+A1:2012, Clause 1 applies, except as follows: 201.1.1 * Scope IEC 60601-1:2005+A1:2012, 1.1 is replaced by: This particular standard is applicable to the BASIC SAFETY and ESSENTIAL PERFORMANCE of oxygen...

1.1 General This Standard specifies requirements for crosslinked polyethylene (PEX) tubing systems that comprise tubing and fittings. Tubing covered by this Standard is made in SDR 9. Systems are pressure rated at three...

1.1 This Standard applies to line pressure regulators (see Clause 3, Definitions), constructed entirely of new, unused parts and materials, hereinafter referred to as regulator(s), either individual or in combination with...

1.1 General This Standard specifies requirements for polyethylene of raised temperature (PE-RT) tubing systems that comprise tubing, with or without a barrier layer, and fittings. Tubing covered by this Standard is made in...

1.1 These requirements cover FITTINGS for use with cable and conduit intended for installation in accordance with the National Electrical Code, ANSI/NFPA 70, the Canadian Electrical Code (CE Code), Part I, CSA C22.1, and the...