Refine Results
Displaying 193 - 204 of 1672
Notice of Intent
Safety requirements for electrical equipment ...
1.1 Scope 1.1.1 Equipment included in scope This part of IEC 61010 specifies general safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used. a)...
Accreditation Bulletin
Revised Edition of the Accreditation Services...
Action required Effective July 1st, 2020, all customers are required to take note of the changes in the revised Accreditation Program Overview . The changes are noted below. Affected customers Customers in any of SCC’s...
Committee
MC/ISO/TC 212
Standardization and guidance in the field of medical laboratories and in vitro diagnostic systems. This includes, for example, quality management, pre- and post-analytical procedures, analytical performance, laboratory safety...
Notice of Intent
Standard test method for wind resistance of modular...
The test method in this Standard determines the wind resistance of vegetated roof assembly when subjected to dynamic wind flow and dynamic wind uplift in laboratory conditions.
Notice of Intent
Safety requirements for electrical equipment ...
This clause of Part 1 is applicable except as follows: 1.1.1 Scope Replacement: This Part 2 is applicable to electrically powered LABORATORY CENTRIFUGES. This group safety publication is primarily intended to be used as a...
Notice of Intent
Textile test methods — Unit mass of fabrics
This method determines the conditioned mass of fabrics. It is primarily for use in the laboratory. Unit mass of fabric is usually calculated on the basis of mass per square meter or mass per meter of full width fabric.
Notice of Intent
Safety requirements for electrical equipment ...
Scope and object This clause of Part 1 is applicable except as follows: 1. Scope 1.1.1 Equipment included in Scope Replacement: This part of IEC 61010 applies to electrically powered laboratory atomic spectrometers with...
Notice of Intent
Standard Laboratory Guide for the Determination...
2.1 This laboratory guide has been developed for the assessment of volatile organic compound emissions from materials used in residential buildings. 2.2 This laboratory guide specifies recommended procedures for the use of...
Notice of Intent
Standard Laboratory Guide for the Determination...
2.1 This laboratory guide has been developed for the assessment of volatile organic compound emissions from materials used in residential buildings. 2.2 This laboratory guide specifies recommended procedures for the use of...
Notice of Intent
Soils – Determination of Minimum and Maximum ...
This standard specifies laboratory test methods that shall be used to determine minimum and maximum densities of cohesionless soils first by pouring the loose material and then by densification of the material using vibration...
Publications
ISO Guide 31:2015, Reference materials – Contents...
The ISO Committee on Reference Materials (ISO/REMCO) published the first and second editions of this Guide in 1981 and 2000, respectively. Since the second edition was published, there has been considerable growth in the...
Notice of Intent
Standard Test Method for Determination of Long...
1.1 This procedure defines the long-term thermal resistance (LTTR) of a foam product as the value measured after 5-year storage in a laboratory environment and provides means for its prediction based on an accelerated...