Search

This Standard specifies the technical requirements for the licensee to ensure structural integrity of cold-worked Zr-2.5 wt% Nb alloy pressure tubes in operating CANDU reactors. Clause 13 of CSA N285.0/N285.6 Series requires...

1.1 Except as indicated in Clause 1.2, Part 1 of this Standard applies to all boilers, pressure vessels, pressure piping, and fittings, as provided for by the Act (as defined in Clause 3) and identified in Part 1 of this...

1 Scope This International Standard specifies the Systems Security Engineering – Capability Maturity Model® (SSE-CMM®). The SSE-CMM® is a process reference model focused upon the requirements for implementing security in a...

This part of ISO/IEC 14443 defines the physical characteristics of proximity cards (PICCs). It is to be used in conjunction with other parts of ISO/IEC 14443

This document specifies a general IoT Reference Architecture in terms of defining system characteristics, a Conceptual Model, a Reference Model and architecture views for IoT

This Standard defines the data format for optical memory cards necessary to allow compatibility and interchange between systems using the linear recording method

This Standard a) defines the renewable energy factor (REF) of a data centre, b) specifies a methodology to calculate and to present the REF, and c) provides information on the correct interpretation of the REF

Scope This standard applies to the safety of MEDICAL ELECTRICAL SYSTEMS, as defined in 2.201. It describes the safety requirements necessary to provide protection for the PATIENT, the OPERATOR and surroundings.

This Standard specifies relay protocol to extend effective network coverage of magnetic field area networks. The addressing, request and response codes are defined

This document defines the physical characteristics of vicinity cards (VICCs). It is intended to be used in conjunction with other parts of the ISO/IEC 15693 series.

This method describes the burning behaviour tests from the CAN/CGSB-4.2 No. 27 Series and recommends which should be used to determine the burning behaviour of different products under various defined conditions.

1.1 This Standard applies to accessible transit buses, as defined in Clause 2. 1.2 The values given in SI (metric) units are the standard. The values given in parentheses are for information only.