Search

Note: The standard type, standard sub-type, scope, and project need for this NOI (originally published on July 18, 2023) were updated by the responsible SDO on February 20, 2024. 1.1 Inclusions This Standard specifies the...

1.1 Purpose The purpose of this Standard is to establish criteria for the design, manufacture, testing, inspection, installation, maintenance, use, and operation of vehicle-mounted aerial devices installed on a chassis...

IEC 60601-1:2005+A1:2012, Clause 1 applies, except as follows: 201.1.1 * Scope IEC 60601-1:2005+A1:2012, 1.1 is replaced by: This particular standard is applicable to the BASIC SAFETY and ESSENTIAL PERFORMANCE of SLEEP APNOEA...

Note: The standard designation of this Notice of Intent (originally published on January 4, 2024) was updated by the responsible SDO on August 27, 2024. This document lays down requirements for the design qualification of...

1.1 This Standard defines the requirements for performance, installation and application, and performance verification of mechanical ventilation systems. This Standard applies to systems that are capable of providing minimum...

1.1 Facilities 1.1.1 Types of facilities 1.1.1.1 Class I nuclear facilities This Standard addresses the design and execution of a nuclear air- cleaning system testing program for Class I nuclear facilities. These facilities...

1.1 This Standard applies to (a) fenestration systems covered by AAMA/WDMA/CSA 101/I.S.2/A440, including (i) vertically sliding windows; (ii) horizontally sliding windows; iii) dual-action windows; (iv) casement windows, both...

1.1 This Standard applies to newly produced, automatic storage water heaters having input ratings of 75,000 Btu/hr (21 980 W) or less (see Clause 3, Definitions), hereinafter referred to as water heaters or appliances...

In general, this part of IEC 60730 applies to automatic electrical controls for use in, on, or in association with equipment for household and similar use. The equipment may use electricity, gas, oil, solid fuel, solar...