Refine Results
Displaying 1681 - 1692 of 11672
Standard Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies
This Standard is applicable to the finished surface or covering of a floor extending to a maximum depth of 65 mm. This method is also applicable to the following: A Materials which cannot be tested as described in Clause 1.1...
Notice of Intent
Methods of Fire Tests of Roof Coverings
The test methods described in this Standard are applicable to roof covering materials and are intended to measure the relative fire-performance characteristics of roof coverings when exposed to fire originating from sources...
Notice of Intent
Standard Specification for “Tin-Clad” Fire Doors...
These requirements cover the design and construction of "tin-clad" fire doors which have demonstrated in fire tests, fire performance properties sufficient to warrant their use in closure assemblies having a fire protection...
Standard for Hose and Hose Assemblies for Flammable and Combustible Liquids
This Standard sets forth minimum requirements for hose and hose assemblies , including vapour recovery hose and assemblies, for use on dispensing devices for flammable and combustible liquids . For the purpose of this...
Notice of Intent
Standard for Signal Receiving Centre Burglar ...
This Standard covers requirements applicable to signal receiving centre facilities and protection service, satellite centres, and bridging centres. This Standard does not include requirements for hold‑up alarm systems or...
Notice of Intent
STANDARD ON ELECTRIC UTILITY WORKPLACE ELECTRICAL...
1.1 This Standard applies to the construction, operation, maintenance and replacement of electric utility systems that are used to generate, transform, transmit, distribute and deliver electrical power or energy to consumer...
Notice of Intent
Standard Test Method for the Determination of...
1.1 This test method determines combustibility parameters for the assessment of degree of combustibility of building materials by measuring the heat release and smoke production from specimens exposed to radiant heat using...
Notice of Intent
Standard Method of Test for Fire Growth of Insulated...
1.1 This is a fire test response Standard. This document describes the test method used to determine the contribution to fire growth provided by a non-loadbearing insulated building panel installed in a sprinklered or...
Notice of Intent
Standard for Control Unit for Fire Alarm Systems
This Standard covers requirements for control units, fire alarm systems and control unit accessories for use in accordance with the Standard for the Installation of Fire Alarm Systems, CAN/ULC-S524, in accordance with Rule 32...
Notice of Intent
Standard for Category 3 Aqueous Film-Forming ...
1. The Standards for foam liquid concentrates are divided into three categories. Category 1 Primarily for use on general-purpose hydrocarbon fires Category 2 Primarily for use on polar solvents, oxygenated fuels, and water...
Notice of Intent
Standard for Category 3 Film-Forming Fluoroprotein...
1. The Standards for foam liquid concentrates are divided into three categories. Category 1 Primarily for use on general-purpose hydrocarbon fires Category 2 Primarily for use on polar solvents, oxygenated fuels, and water...
Notice of Intent
Standard for Categories 1 and 2 Foam Liquid Concentrates
1. The Standards for foam liquid concentrates are divided into three categories. Category 1 Primarily for use on general-purpose hydrocarbon fires Category 2 Primarily for use on polar solvents, oxygenated fuels, and water...