Search

These requirements cover hose in nominal internal diameter sizes of 8 mm up to and including 32 mm for use on portable and wheeled fire extinguishers, hand hose line fixed extinguishing systems, and also as booster hose on...

1.1 This Standard covers requirements for corrosion control additives for fire sprinkler systems, such as corrosion inhibitors. 1.2 These solutions are intended for use in wet pipe sprinkler systems for installation in...

1.1 This Standard covers requirements for vapor corrosion inhibitors and their delivery system for use in fire sprinkler systems. 1.2 These corrosion inhibitors are intended for use in dry pipe and pre-action sprinkler...

This standard specifies the test method to evaluate the reaction of wall and ceiling products to fire when installed at the surface of a small room and exposed directly to a specified ignition source. The test represents a...

1.1 General This Standard specifies requirements, in accordance with the National Building Code of Canada, for the design and strength evaluation of a) structures of reinforced and prestressed concrete; and b) plain concrete...

1 Scope 1.1 This document specifies the physical property requirements and test methods used to verify compliance of those material properties for low pressure spray applied rigid two-component polyurethane foam for use as...

This part of IEC 61347 specifies particular safety requirements for electronic controlgear for use on d.c. supplies up to 250 V and a.c. supplies up to 1 000 V at 50 Hz or 60 Hz and at an output frequency which can deviate...

1.1 This Standard covers requirements for external corrosion protection systems on steel non-pressure tanks that are used for the underground storage of flammable liquids and combustible liquids. The requirements are as...

This standard is applicable to ac contactors applied at voltages in the range of 1 501V to 15kV, and metal-enclosed contactor-based controllers, control centers, and other control assemblies and associated equipment applied...

This document specifies requirements for the qualification and certification of personnel who perform industrial non-destructive testing (NDT) in the following methods. a) acoustic emission testing; b) eddy current testing; c...

Proportional Flow Control Devices are commonly found in European hydronic systems. Typically, these product are installed as a part of an integrated system to balance flow into both sides of a double-wall heat exchanger. One...

PURPOSE AND SCOPE This standard specifies the characteristics and test methods relating to pipe and fittings manufactured from unplasticized poly(vinyl chloride) [PVC-U], with a nominal diameter ranging from 200 mm to 1200 mm...