Search

This method assesses the resistance of textile fabrics to burning when a flame is applied to the lower edge. Because the procedure creates conditions favourable to combustion, the test is severe one relative to some others in...

This method determines the flame spread properties of a textile or product when a specimen is supported at an angle of 45º and a flame is applied to its upper surface for 1 s.

This method determines the resistance of textile materials containing cellulosic fibres to deterioration by the action of a cellulolytic fungus. The method is of particular importance in testing fabrics designed for outdoor...

This method assesses the fastness of the colour of textile fabrics and yarns to dry cleaning solvent. The results of this test have been found to correlate satisfactorily with those obtained in commercial dry cleaning...

1 Scope This document specifies a method for the determination of the size distribution of particulate biofuels by the horizontally oscillating screen method. It applies to particulate uncompressed fuels with a nominal top...

Scope This document specifies a method for the determination of the size distribution of particulate biofuels by the vibrating screen method. The method described is meant for particulate biofuels only, namely materials that...

This part of ISO 5356 specifies requirements for screw-threaded weight-bearing conical connectors intended for use with inhalation anaesthesia apparatus and ventilators; such connectors are intended for mounting heavy...

This part of IEC 60384 applies to capacitors and resistor-capacitor combinations which will be connected to an a.c. mains or other supply with nominal voltage not exceeding 1 000 V a.c. (r.m.s.) or 1 000 V d.c. and with a...

This method determines the tearing strength of woven and nonwoven fabrics by the trapezoid procedure. Two procedures for the calculation of tearing strength are given, one for woven fabrics and the other for nonwoven fabrics...

This Technical Report gives equations for the calculation of twist factors in SI units and conversion tables with which twist factors expressed in other unit systems can be transformed into SI units. It is applicable to...

Please note the following NOI has been withdrawn on 2019-02-12 as requested by the responsible SDO. This method determines the breaking strength of sewn seams in woven textile fabrics. The seams may be obtained either from a...

Please note the following NOI has been withdrawn on 2019-02-12 as requested by the responsible SDO. This method describes a procedure for evaluating the resistance of fabrics to pilling using the rotating box method. A pill...