Search

This method determines the dimensional changes (shrinkage or stretch) that may occur in a fabric as a result of relaxation of strain when subjected to open-head steaming on a stream pressing machine.

This method describes a procedure for subjecting textile materials to the action of solvents for the ultimate determination, by the appropriate test method, of the effect of such a treatment on the permanence of finishes...

This method assesses the fastness of the colour of textile materials to the action of perspiration. It is applicable to dyed, printed and otherwise coloured fibres, yarns and fabrics of all kinds. In the case of multicoloured...

This method describes a procedure for measuring the penetration of water through fabrics, with the fabric under constant water pressure. It is primarily applicable to heavily proofed fabrics used in tarpaulins, tentage and...

This method determines the resistance of textile fabrics to penetration by water under pressure higher than those obtained with CAN/CGSB-4.2 No. 26.3-M. It is intended primarily for use with coated fabrics.

This method determines the resistance of textile materials to disfiguration by growth of fungi that derive their assimilable carbon not from the pure textile fibres but from nonfibrous substances present in or on the fibres...

This method determines the resistance of textile materials containing cellulosic fibres to deterioration by the action of a cellulolytic fungus. The method is to be used for textile materials from which it is not convenient...

This method describes a procedure for evaluating the resistance of textile fabrics to snagging. The method is particularly applicable to double knit fabrics which contain 100% textured filament yarns, such as nylon and...

This part of ISO 105 specifies the terms and definitions on colour measurements that are used throughout ISO 105. These definitions are intended to be used only within the context and scope of ISO 105.

Specifies requirements for the development, validation and routine control of a moist heat sterilization process for medical devices

Specifies general performance requirements for washer-disinfectors (WD) and their accessories that are intended to be used for cleaning and disinfection of re-usable medical devices and other articles used in the context of...

Specifies particular requirements for washer disinfectors (WD) that are intended for use for the cleaning and thermal disinfection, in a single operating cycle, of re-usable medical devices such as surgical instruments...