Search

1.1 This test method determines the wind uplift resistance of membrane-roofing systems when subjected to dynamic wind load cycles. The test methods are applicable to a) mechanically attached membrane roofing systems; and b)...

This part of ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of active chlorine in concentrations such as are used to disinfect swimming-pool...

ISO 35106:2017 specifies requirements and provides recommendations and guidance for the collection, analysis and presentation of relevant physical environmental data for activities of the petroleum and natural gas industries...

This test method describes two procedures for the visual haze rating or appearance of contamination of liquid fuels with an ASTM colour rating of 5 or less, and a cloud point below the reported temperature of the test.

This part of CSA E60598 specifies requirements for ground recessed luminaires incorporating light sources to be installed and used on branch circuits not exceeding 600 V and used in accordance with the rules of the Canadian...

A complementary document will aim to specify the requirements for the administration, implementation, and maintenance of IBS Systems consistent with the IBS Objective-Based Code.

1.1 This method is intended for measuring the nominal thickness of geotextile fabrics as determined between parallel plane surfaces under a pressure of 2.0kPa. 1.2 Since most geotextiles are compressible, the thickness...

1.1 This method is intended for use in determining the breaking load and elongation at rupture of both woven and non-woven geotextiles by the grab method. 1.2 The procedure is applicable to geotextiles either in the...

1.1 This method is used to determine the Filtration Opening Size (FOS) of woven, knitted and non-woven geotextiles but it is particularly recommended for non-woven geotextiles. 1.2 This method can be used to measure the FOS...

1.1 This method is for the determination of stiffness of geotextiles expressed as bending length and flexural rigidity. It is known as the single cantilever test. 1.2 This method is not applicable to fabrics that twist badly...

This part of ISO 12614 specifies tests and requirements for the rigid fuel line, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. This part of ISO 12614 is not...

This part of ISO 12614 specifies tests and requirements for the fittings, a liquefied natural gas fuel system component intended for use on the types of motor vehicles defined in ISO 3833. This part of ISO 12614 is not...