Search

This International Standard specifies signalling interworking between QSIG and the Session Initiation Protocol (SIP) in support of basic services within a corporate telecommunication network (CN) (also known as enterprise...

Scope This clause of Part 1 is applicable, except as follows: 1.1 Addition: This Standard applies to jointers for cutting into wood or similar material.

This Standard a) defines the renewable energy factor (REF) of a data centre, b) specifies a methodology to calculate and to present the REF, and c) provides information on the correct interpretation of the REF

The purpose of CAN-ASC-4.1 is to develop a standard that goes above mandatory minimum technical specifications and produces equity-based technical requirements. There are common areas where persons with disabilities may...

Note: This NOI (originally published on July 18, 2023) was reissued by the responsible SDO on August 20, 2024. This standard specifies safety requirements for the design, installation and operation of multi-fuel vehicle...

1.1 This Standard covers requirements for permanently installed, portable and transportable toxic and combustible gas and vapour detectors and sensors, including accessories, intended to be employed in indoor locations or...

The scope of these projects it to complete the international adoptions of all the standards listed in Annex A.

This International Standard provides a framework and establishes requirements for partially anonymous, partially unlinkable authentication.

This clause of Part 1 is applicable, except as follows: Addition: This Standard applies to routers and trimmers.

1. Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: Replace the text by the following: This part of IEC 61010 applies only to electrically powered...

Replacement: This International Standard applies to BASIC SAFETY and ESSENTIAL PERFORMANCE of equipment incorporating one or more sources of OPTICAL RADIATION in the wavelength range 200 nm to 3 000 nm, with the exception of...

Scope and object This clause of Part 1 is applicable except as follows: 1.1.1 Equipment included in scope Replacement: This part of IEC 61010 specifies safety requirements for electrically powered laboratory equipment for the...