Search

1.1 This Standard applies to natural gas fuelling stations that may be employed for fleet and public dispensing operations. 1.2 Where the word "shall" is used in this Standard, it indicates a requirement unless approved...

1) This Technical Report describes extensions to the C++ standard library that is described in the International Standard for the C++ programming language [14]. 2) This Technical Report is non-normative. Some of the library...

1) This Technical Report describes extensions to the C++ standard library that is described in the International Standard for the C++ programming language [14]. 2) This Technical Report is non-normative. Some of the library...

This part of this standard specifies a method for assessing the heat release rate and dynamic smoke production rate of specimens exposed in the horizontal orientation to controlled levels of irradiance with an external...

This Standard contains descriptions of the IEEE 802® standards published by the IEEE for frame-based data networks as well as a reference model (RM) for protocol standards. The IEEE 802 architecture is defined, and a...

1.1 This Standard specifies minimum requirements for the design, construction, installation, operation, inspection, testing, alteration, and maintenance of permanently installed manlifts for the vertical transportation of...

1.1 This Standard sets forth the minimum requirements for These requirements cover primary, secondary, and coaxial types of flexible connector pipes intended for short length transfer and containment of the specific liquid...

1. Scope 1.1 This Standard applies to stationary, permanently-connected hot-water and steam boilers for use on nominal system voltages of 600 V and less, for residential, commercial, and industrial use in nonhazardous...

This standard applies to four grades of gasoline to which no lead or phosphorus compounds have been added. They are intended for use in spark-ignition engines under a wide range of climatic conditions. This standard is not...

1.1 This security evaluation standard applies to the testing of network connectable components of healthcare systems. It applies to, but is not limited to, the following key components: a) Medical devices; b) Accessories to...

1.1 This Standard applies to modular wiring systems combined with the office furniture in which they are intended to be used. 1.2 This Standard applies to equipment intended to be connected to one or more supply circuits at a...

1.1 This Standard specifies maximum losses for power transformers of types similar to or as described in CSA Standard CAN/CSA-C88. The losses specified are for normal designs of transformer, as described in the relevant...