Search

1 SCOPE 1.1 This Standard provides minimum requirements for primary containment leak detection that uses quantitative assessment of physical characteristics to detect leaks in the primary containment. 1.2 These requirements...

This International Standard is applicable to the development and use of conformance test method specifications for POSIX standards and may be applicable to other application programming interface specifications. This...

These requirements cover exhaust hoods for commercial and institutional kitchens and are intended for placement over restaurant type cooking equipment, such as ranges, broilers, deep fat fryers, grills, etc., during normal...

NOTE: Please note that the standard development activity of this NOI was updated as requested by the responsible SDO on October 26, 2020. 1.1 This is a fire test response Standard. This document describes the test method used...

These requirements cover the design and construction of "tin-clad" fire doors which have demonstrated in fire tests, fire performance properties sufficient to warrant their use in closure assemblies having a fire-protection...

1.1 The purpose of this test method is to determine the contribution to fire growth of protective coverings over foamed plastic insulation when tested in a Full-Scale Room Test in accordance with CAN/ULC-9705, Fire Tests -...

Note: The title for this NOI was updated by the responsible SDO on August 24 ,2021 (originally published March 17, 2020). These requirements cover electric battery powered airport ground support equipment, such as pushbacks...

1.1 This is a fire test response Standard. This document describes the test method used to determine the contribution to fire growth provided by a non-loadbearing insulated building panel installed in a sprinklered or...

This Standard is applicable to the finished surface or covering of a floor extending to a maximum depth of 65 mm. This method is also applicable to the following: A Materials which cannot be tested as described in Clause 1.1...

Note: The standard development activity for this NOI (originally published on May 2, 2023) was updated by the responsible SDO on July 25, 2023 . 1.1 This Standard establishes a minimum level of protection and safety of...

This Standard specifies the requirements for the installation of spray applied low pressure thermal insulating polyurethane foam. The material can be installed as thermal insulation, an air or vapor barrier, or a combination...

These requirements cover lightning protection components for use in the installation of complete systems of lightning protection on buildings and structures.