Search

ISO 18125:2017 specifies a method for the determination of the gross calorific value of a solid biofuel at constant volume and at the reference temperature 25 °C in a bomb calorimeter calibrated by combustion of certified...

This method determines the tearing strength of woven fabrics by the single-rip procedure. The testing and evaluation of a product against this method may require the use of materials and/or equipment that could be hazardous...

ISO 35106:2017 specifies requirements and provides recommendations and guidance for the collection, analysis and presentation of relevant physical environmental data for activities of the petroleum and natural gas industries...

This test method describes two procedures for the visual haze rating or appearance of contamination of liquid fuels with an ASTM colour rating of 5 or less, and a cloud point below the reported temperature of the test. The...

This test method describes two procedures for the visual haze rating or appearance of contamination of liquid fuels with an ASTM colour rating of 5 or less, and a cloud point below the reported temperature of the test.

This part of ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of active chlorine in concentrations such as are used to disinfect swimming-pool...

Please note the following NOI has been withdrawn on 2019-02-12 as requested by the responsible SDO. This part of ISO 6741 specifies methods for obtaining laboratory samples for mass determination by one of the methods given...

Please note the following NOI has been withdrawn on 2019-02-12 as requested by the responsible SDO. This part of ISO 6741 specifies methods for the determination of the commercial mass of homogeneous consignments of those...

This Part applies to Class T fuses rated 1200 A or less and 300 or 600 V ac. DC ratings are optional.

1.1.2 These requirements cover fuseholders intended for use with Class R Fuses as described in NMX-J-009/248/12-2000-ANCE, CSA C22.2 No. 248.12, UL 248-12, Low-Voltage Fuses – Part 12: Class R Fuses.

This part of CSA E60598 specifies requirements for ground recessed luminaires incorporating light sources to be installed and used on branch circuits not exceeding 600 V and used in accordance with the rules of the Canadian...

This clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to hand-held routers intended for cutting slots into or shaping the edge of wood and analogous materials, plastics and non...