Search

201.1 Scope, object and related standards Clause 1 of the general standard1 applies, except as follows: 201.1.1 * Scope Replacement: This part of the 80601 International Standard applies to BASIC SAFETY and ESSENTIAL...

Note: The scope for this NOI (originally published on November 30, 2021) was updated by the responsible SDO on April 25, 2023. Note: The scope for this NOI (originally published on November 30, 2021) was updated by the...

.1 This standard designates a system of symbols to be used in the labelling of textiles to indicate the preferred care procedures for restoring the textiles to an acceptable usable condition with respect to the properties...

1.1 This standard applies to flat, transparent glass, obtainable as polished plate or float glass, one side of which is covered with a thin metallic oxide coating possessing high reflective properties to control transmission...

This document specifies conformance criteria for both bitstreams and decoders compliant with the MPEG-H 3D audio standard as defined in ISO/IEC 23008-3. This is done to assist implementers and to ensure interoperability.

201.1 * Scope, object and related standards Clause 1 of the general standard1) applies, except as follows: 201.1.1 * Scope Replacement: This particular standard applies to BASIC SAFETY and ESSENTIAL PERFORMANCE of ECG ME...

A3001-18 - Cementitious materials for use in concrete Scope 1.1 This Standard addresses the following aspects of cementitious materials: a) their definitions; b) their chemical, physical, and uniformity requirements; c) the...

This part of ISO/IEC 10373 defines test methods for characteristics of integrated circuit cards with contacts and related interface devices according to the definition given in ISO/IEC 7816. Each test method is cross...

1.1 This International Standard applies to switches (mechanical or electronic) for appliances actuated by hand, by foot or by other human activity, to operate or control electrical appliances and other equipment for household...

1.1 These requirements apply to natural and propane gas-fired packaged boilers. 1.2 The requirements in Part (A) of this Standard apply to package boilers, fire and water tube, steam and hot water, having manufacturer's...

This International Standard specifies the signalling protocol for the support of the Call Priority Interruption (SS-CPI) and Call Priority Interruption Protection (SS-CPIP) supplementary services at the Q reference point...

This Standard defines the construction, safety and performance requirements of packaged or factory matched hydrogen gas generation appliances, herein referred to as hydrogen generators, using electrochemical reactions to...