Search

This method contains procedures for finishing (smoothing) fabric after washing or dry cleaning. Three principal methods of pressing and a procedure for restoration after dimensional change are described. These procedures are...

These requirements cover the construction and performance, exclusive of performance during fire tests, of portable dry chemical and dry powder (Class D) fire extinguishers. Dry chemical and dry powder fire extinguishers are...

This National Standard of Canada applies to two types of petroleum distillates intended for use in applications as described below. Type No. 1-K Kerosene is intended for use in unvented space heaters as described in CAN3-B140...

1.1 These requirements cover electrically operated single and multiple station smoke alarms intended for open area protection in indoor locations, in accordance: a) Installation of Smoke Alarms, CAN/ULC-S553; b) National...

1.1 This Part applies to fuses for photovoltaic (PV) systems rated up to 1500 Vdc. 1.2 Fuses for photovoltaic (PV) systems are intended to be used for the protection of photovoltaic strings or arrays and their associated...

These requirements cover electrical rigid metal conduit – steel (ERMC-S), elbows, couplings, and nipples for use as a metal raceway for installation of wires and cables in accordance with CSA C22.1, Canadian Electrical Code...

Health Standards Organization (HSO) is developing a National Standard of Canada (NSC) for Infection Prevention and Control (IPC), CAN/HSO 4001:2026. This standard will focus on enabling high quality, people-centred care with...

This clause of Part 1 is applicable with the following exception: 1.1 Scope Addition: This Part 2 of IEC 62109 covers the particular safety requirements relevant to d.c. to a.c. inverter products as well as products that have...

This National Standard of Canada describes a product specification in compliance to ISO 19131:2007 – Geographic information – Data product specification for the provision of fundamental geographic information to the public...

1 SCOPE 1.1 These requirements cover factory-built fireplace systems capable of utilizing solid fuels, as specified by the manufacturer, and intended for provision of supplementary heating in buildings. These fireplace...

This Part applies to semiconductor fuses rated 2000 A or less. DC ratings are optional. NOTE: The Canadian Electrical Code, Part I, defines low voltage as any voltage from 31 to 750 V inclusive and high voltage as any voltage...

These requirements cover factory-built grease ducts and grease duct assemblies that are intented to be installed as alternatives to the grease ducts constructed of all welded 1.37 mm carbon steel or 1.09 mm stainless steel...